Rechercher

1.1 La présente norme énonce les exigences minimales relatives aux réservoirs non pressurisés en acier utilisés pour le stockage hors sol de liquides inflammables et combustibles qui sont compatibles avec les matériaux de...

1 Scope This International Standard deals with the safety of electric motor-operated or magnetically driven: – HAND-HELD TOOLS (IEC 62841-2); – TRANSPORTABLE TOOLS (IEC 62841-3); – LAWN AND GARDEN MACHINERY (IEC 62841-4). The...

1.1 Produits couverts 1.1.1 Cette norme s'applique aux centres de commande de moteurs devant être utilisés conformément au Code national de l'électricité des États-Unis, ANSI/NFPA 70, CSA C22.1, au Code canadien de l...

1.1 The requirements of this Standard apply to manually operated, general-use snap switches for connection to copper (Cu) or copper-clad conductors used in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, or...

NOTE: Due to an oversight by the responsible SDO, the Notice of Intent (NOI) for CSA/ANSI NGV 6.1 was not registered as required. The NSC has since been published in March 2018. In order to respect the approved parameters of...

1.1 This Standard applies to manual lever operated gas shut-off valves, sizes NPS 1/4 inch to 8 inch, of metallic construction with welded, or flanged, or threaded ends other than pressure lubricated designs for use with...

1.1 This Standard sets forth the minimum requirements for containment sumps, and associated sump fittings and accessories (products) intended for below-grade or at-grade use as an enclosure for the housing of, and access to...

1 DOMAINE D’APPLICATION 1.1 Cette norme porte sur les exigences relatives aux systèmes de protection contre la corrosion extérieure pour les réservoirs non pressurisés en acier utilisés pour le stockage souterrain de liquides...

1.1 These requirements cover valves that are intended to be used for the control of flammable liquids and their vapors. They are of the type commonly used in piping systems and in the assembly of motor fuel dispensing and...

Scope 1.1 Facilities 1.1.1 Types of facilities 1.1.1.1 This Standard addresses the design and operation of effluent monitoring programs for Class I nuclear facilities and uranium mines and mills. These facilities include (a)...

This clause of part 1 is applicable except as follows: 1.1 Replacement: This part of IEC 60730 applies to automatic electrical burner control systems for the automatic control of burners for oil, gas, coal or other...

1.1 Cette norme couvre les connecteurs de fils d'épissage multipolaires isolés, accouplés ou non, destinés au câblage sur place et au câblage d'usine pour une utilisation conformément au Code canadien de l'électricité, partie...