Rechercher

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric HEAT PUMPS, including SANITARY HOT WATER HEAT PUMPS, AIR-CONDITIONERS, and DEHUMIDIFIERS incorporating motor...

1.1 These requirements cover single pole locking-type separable attachment plugs, cord connectors, panel inlets, and panel outlets, adapters, and accessories, rated up to a maximum of 800 amperes and up to 600 volts ac or dc...

1.1 Généralités Cette norme précise les critères d’établissement d’un programme de gestion de la sûreté des installations liées à l’industrie du pétrole et du gaz naturel en visant à s’assurer que les menaces à la sûreté et...

1.1 This Standard applies to newly produced gas-fired low-pressure steam and hot water boilers with gas inlet pressure ratings not exceeding 0.5 psi (3.5 kPa) and having input ratings of less than 12,500,000 Btu/hr (3 663 389...

This IEC second edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous...

Scope This International Standard defines the signalling protocol for the purpose of basic call/connection control at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together...

This International Standard deals with the safety of electric motor-operated or magnetically driven: - HAND-HELD TOOLS (IEC 62841-2); - TRANSPORTABLE TOOLS (IEC 62841-3); - LAWN AND GARDEN MACHINERY (IEC 62841-4). The above...

This International Standard is a part of the functional requirements for the Private Integrated Services Network (PISN) and defines the functions and procedures that are required by Private Integrated Services Network...

1 Scope and object 1.1 Scope 1.1.1 Probe assemblies included in scope This part of IEC 61010 specifies safety requirements for hand-held and handmanipulated probe assemblies of the types described below, and their related...

1.1 This Standard applies to single-polarity, hand-, or tool-applied splicing wire and cable connectors intended for use with all alloys of copper, aluminum conductors, or copper-clad aluminum conductors, or all three, in...

[Replace the first paragraph with the following] This Standard applies to fans and ventilation equipment that is a) cord-connected, rated at not more than 250 V; b) permanently connected to supply circuits of 600 V and less...

1.1 This Standard applies to: - meter-mounting devices, - combination meter-mounting devices with load-side circuit breaker, - indoor and outdoor rated, and meter-mounting devices, either as complete self-contained devices or...