Rechercher

1. Scope 1.1 This Standard applies to the factory installation of propane appliances and equipment in park model trailers. Note: CGA Standard CAN1-B149.2 was used as a basis for the preparation of this Standard and should be consulted for installations not covered here.

This National Standard of Canada is equivalent to International Standard ISO 6683-1981. This International Standard establishes the minimum performance requirements for seat belts and the fastening elements of seat belts necessary to restrain an operator or rider within a roll-over protective structure (ROPS) in the event of a machine roll-over as defined in ISO 3471. NOTE - Dynamic seat…

1. Scope Z241.0 1.1 This Standard provides the definition of the term park model trailer as used in the CAN/CSA-Z241 Series, Park Model Trailers. It also gives general safety requirements that apply to the other Standards in the CAN/CSA-Z241 Series. Z241.1 1.1 Requirement Specification This Standard specifies vehicular requirements for park model trailers including minimum…

1.1 This Standard provides guidance for the safe use of medically applied laser systems, hereinafter referred to as medical lasers, for diagnostic, therapeutic, and medical research purposes in health care facilities. It is intended for use by all persons associated with the administration, installation, operation, maintenance, and service of medical lasers. 1.2 This Standard presents…

This standard applies to rigid cellular glass thermal insulation for use on surfaces having a temperature range of -270 to +425 degrees C in buildings, on tanks, pipes, tubing and equipment (Note 1). Note 1: Materials covered by this standard may contain a controlled substance under the Controlled Products Regulations (par. 2.1.2). For verification, where applicable, the manufacturer…

IEC 60317-39:1992 specifies the requirements of glass-fibre braided, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper winding wire, temperature index 180. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock…

IEC 60317-40:1992 specifies the requirements of glass-fibre braided, silicone varnish treated, bare or enamelled rectangular copper winding wire, temperature index 200. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot…

1.1 General 1.1.1 This Standard sets forth requirements and guidance on design principles, safety levels, and loads to be used in connection with the design, construction, transportation, installation, and decommissioning of fixed offshore structures. 1.1.2 It is intended to cover all such fixed offshore structures, or parts thereof, including the main deck and topside structures,…

1.1 General This Standard addresses the geotechnical engineering aspects of (a) gravity-base structures; (b) fill structures; (c) fill-retention structures; and (d) pile-supported structures. Specific considerations include site investigations, general design principles, the influences of soil and natural processes on the foundation components, and the geotechnical factors that…

1. OBJECT AND SCOPE OF APPLICATIOn The present standard describes the method to determine the relation between the moisture content and the density of soils and soil aggregates when these are compacted in standard moulds using 4,54 kg rammers dropped a height of 457 mm. Four methods are described herein. NOTE 1 - The laboratory compaction tests described in this standard generally…