Rechercher

Scope 1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated laboratory test. 1.2 This procedure, based on ASTM standard test methods ASTM C1303 and ASTM C518, can be applied to a wide range of preformed as well as field…

Domaine d’application 1.1 Cette procédure définit la résistance thermique à long terme (RTLT) d’un produit de mousse comme étant la valeur mesuré après 5 ans d’entreposage dans un environnement de laboratoire et fournit des moyens de prédiction basés sur un essai accéléré en laboratoire. 1.2 Cette procédure, basée sur les méthodes d’essai normalisées ASTM ASTM C1303 et ASTM C518, peut être…

This document specifies requirements for a procedure that uses the mechanical action of a hexapod tumbler tester to produce changes in appearance (surface, structure and colour) to all types of textile floor coverings. It does not include pilling or colour changes due to other actions.

Le présent document spécifie les exigences relatives à un mode opératoire qui utilise l’action mécanique d’un tambour d’essai pour hexapode pour produire des changements d’aspect (structure de surface et couleur) sur tous types de revêtements de sol textiles. Il ne traite pas du boulochage ni des changements de couleur dus à d’autres actions.

La présente norme spécifie une méthode d'analyse quantitative du quartz résiduel (c'est-à-dire du quartz alpha) présent dans les briques de silice à une teneur massique comprise entre 0,3 % et 5,0 %, par diffraction des rayons X (DRX), au moyen d'un diffractomètre à géométrie Bragg-Brentano. Elle fournit également des informations concernant la préparation des échantillons et l…

This document specifies a method for the measurement of the relative extent of oxidation present in ultra-high-molecular-weight polyethylene (UHMWPE) moulded forms or forms fabricated for use in the manufacture of surgical implants.

This document specifies the requirements and corresponding test methods for ultra-high-molecular-weight polyethylene (UHMWPE) powder moulding materials for use in the manufacturing of moulded forms that are subsequently used in the manufacturing of surgical implants. This document is not applicable to UHMWPE moulding materials that were blended with any additives or different forms of…

This document specifies a test method for investigating the oxidative stability of ultra-high-molecular-weight polyethylene (UHMWPE) moulded forms as a function of processing and sterilization method. This document describes a laboratory method for accelerated ageing of specimens taken from UHMWPE moulded forms or forms fabricated from these for use in the manufacture of surgical implants. The…

This document specifies the requirements and corresponding test methods for moulded forms (e.g. sheets, rods and near net shape bars) made from ultra-high-molecular-weight polyethylene (UHMWPE) powder for use in the manufacture of surgical implants. This document is not applicable to moulded forms that were intentionally irradiated, that were made from UHMWPE blended with additives or UHMWPE…

This document specifies the test method for assessing the morphology of ultra-high-molecular-weight polyethylene (UHMWPE) moulded forms as defined in ISO 5834-2. The assessment of morphology of UHMWPE moulded forms is not required in routine monitoring of validated moulding process because alternative test methods defined in ISO 5834-2, such as density and mechanical properties, already provide…