Rechercher

Scope 1.1 This Standard applies to the design, manufacturing, installation, maintenance, and operation of power presses (presses). The purpose of this Standard is to reduce the risk of injury to people working on or adjacent to presses during press set-up, operation, and maintenance. 1.2 This Standard covers the occupational health and safety requirements for all classes of presses, i.e…

Scope 1.1 This Standard applies to wet-process porcelain and toughened glass suspension-type insulators used on ac overhead power lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. This Standard applies to single insulator units only and does not apply to long rod insulators. 1.2 This Standard specifies provisions for (a) the mechanical, electrical, and…

Scope 1.1 This Standard specifies requirements for performance testing of solid-fuel-burning heating appliances, including maximum emission rates. 1.2 This Standard specifies a method for determining (a) heat outputs; (b) appliance efficiencies; (c) emission levels and composition; and (d) flue gas flow rates. 1.3 This Standard applies to (a) manually and automatically fuelled…

Scope 1.1 This Standard applies to cord-connected and permanently connected fans and ventilators intended to be (a) connected to supply circuits of 600 V and less; (b) used in non-hazardous locations; (c) used indoors or outdoors; and (d) used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to fans and ventilators used for ventilating or exhaust…

Scope 1.1 This Standard covers assemblies of wiring terminals and supporting blocks for copper conductors, copper and aluminum conductors, and aluminum conductors rated at a maximum of 1500 V and 2000 kcmil, intended to provide for the connection of wiring designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 These terminal blocks are intended to…

Scope 1.1 This Standard applies to the lines and equipment associated with underground electric supply and communication systems located entirely outside buildings and fenced supply stations. See CAN/CSA-C22.3 No. 61936-1 for installations within fenced or indoor supply stations. 1.2 Existing installations, including maintenance replacements, additions, and alterations, meeting the original…

Preface This is the first edition of CAN/CSA-C22.2 No. 80601-2-58, Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 80601-2-58 (first…

Preface This is the first edition of CAN/CSA-C22.2 No. 80601-2-59, Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 80601-2-59 (first…

Scope 1.1 This Standard applies to cord-connected and permanently connected cooking and liquid-heating appliances* rated for use on nominal single-phase system voltages of 240 V and less and designed to be used in nonhazardous locations in household and similar applications in accordance with the Rules of the Canadian Electrical Code, Part I. *The abbreviated term "appliance" is…

Scope 1.1 This Standard specifies the test methods and marking requirements, and references energy efficiency levels for three-phase induction motors. Note: The test methods contained in this Standard are not limited to specific types of motors, but where this Standard is referenced in regional legislation, some specific motor types might be included or excluded from the regulations.…