CSA C22.2 No. 211.1-06 (R2021)
1.1
This Standard applies to rigid PVC conduit — type EB1 for encasement in concrete or masonry and type
DB2/ES2 for direct burial or encasement in concrete or masonry — and associated fittings in accordance
with the Rules of the Canadian Electrical Code, Part I, for ordinary locations.
1.2
The conduits and associated fittings covered by this Standard are intended for a maximum continuous
operating temperature of 75 °C.
1.3
The accessories covered by this Standard include straight couplings, 5° angle couplings, caps, plugs, bell
end terminators, bends, and adapters.
1.4
In CSA Standards, “shall” is used to express a requirement, i.e., a provision that the user is obliged to
satisfy in order to comply with the standard; “should” is used to express a recommendation or that
which is advised but not required; “may” is used to express an option or that which is permissible within
the limits of the standard; and “can” is used to express possibility or capability. Notes accompanying
clauses do not include requirements or alternative requirements; the purpose of a note accompanying a
clause is to separate from the text explanatory or informative material. Notes to tables and figures are
considered part of the table or figure and may be written as requirements. Annexes are designated
normative (mandatory) or informative (non-mandatory) to define their application.
OEN:
CSA
Langue:
English
Code(s) de l'ICS:
01
Statut:
Norme
Date de Publication:
2010-12-31
Numéro Standard:
CSA C22.2 No. 211.1-06 (R2021)