Rechercher

The objective of this document is to promote the harmonization of data and information reporting formats in order to provide the basis for the evaluation of occupational exposure with a view to allow for benchmarking capacity at the user level, technical review level, country level and global level (such as UNSCEAR) database or register on occupational exposure. Activity sectors and occupations (…

1 Domaine d’application 1.1 Les exigences de la présente norme s’appliquent au matériel unidirectionnel et bidirectionnel non embarqué d’une puissance inférieure ou égale à 1000 V c.a. et 1500 V c.c., qui transfère l’énergie électrique entre un véhicule électrique et des charges externes et fonctionne en parallèle avec un système d’alimentation électrique, comme le réseau de distribution d’…

Scope This National Standard specifies minimum requirements for preparing, developing, and conducting challenge-based, agile and open procurement of digital products and services. This Standard defines a framework for organizations evaluating the suitability of digital product and service providers using “challenge-based” criteria. This methodology requires organizations sourcing digital,…

Scope 1.1 This Standard sets forth the minimum requirements for containment sumps, and associated sump fittings and accessories (products) intended for below-grade, or at-grade, or above-grade use as an enclosure for the housing of, and access to, underground piping, connector piping, and other fueling system components (such as pumps, valves, sensors, wiring, etc.), in addition to temporary…

This document specifies the technical delivery requirements for round and flat bars and wire rods manufactured from the alloyed steels listed in Table 4, intended for hot-formed and subsequently heat-treated springs or cold-formed and subsequently heat-treated springs. The products are supplied in one of the heat-treatment conditions given for the different types of products in Table 2 and in one…

Scope 1.1 These requirements apply to ultraviolet germicidal irradiation (UVGI) equipment and systems intended for installation and use in accordance with the U.S. National Electrical Code (NEC), NFPA 70 and in accordance with the Canadian Electrical Code, Part I (CEC), CSA C22.1. These requirements cover: a) UV Germicidal Equipment – These devices emit uncontained UV energy into the…

This document gives guidance on how to secure physical documents for specifying entities of physical documents. It establishes a procedure for security design, which includes: —     risk assessment; —     determination of document classes; —     introduction of security features; —     security evaluation; —     document risk mitigation. This document is applicable to secure physical documents…

Scope 1.1 This Standard sets forth the minimum requirements for cover primary, secondary, and coaxial types of flexible connector pipes intended for short length transfer and containment of the specific flammable and combustible liquids (or vapors thereof) identified in this Standard, at commercial (public) or fleet (private) automotive motor vehicle fueling stations or similar fuel…

Domaine d’application 1.1 La présente norme fournit les exigences minimums pour les types principaux, secondaires et coaxiaux de tuyaux de raccordement flexibles destinés au transfert et à la rétention sur de courtes distances de liquides (ou vapeurs) inflammables et combustibles spécifiques, comme décrit dans la présente norme, dans les postes de ravitaillement commerciaux (publics) ou de…

1 Scope 1.1 Inclusions This Standard applies to newly produced automatic valves constructed entirely of new, unused parts and materials. These valves can be individual automatic valves or valves utilized as parts of automatic gas ignition systems. This Standard also applies to commercial/industrial safety shutoff valves herein after referred to as C/I valves. Components performing functions…