Rechercher

Affiner les résultats
Code de la Classification internationale pour les normes (ICS)
Source
Code de l’organisme d’élaboration de normes (OEN)
Langue
Statut
Code de la Norme nationale du Canada (NNC)
Date de publication

De

à

Affichage 341 - 350 de 2903
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-0...
This is the third edition of C22.2 No. 61010-2-032, Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-032: Particular requirements for hand-held and handmanipulated current sensors for electrical test and measurement, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission)…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
2014-11-30
Code(s) de l'ICS :
19.080
STANDARD METHOD OF FIRE TESTS FOR NON-METALLIC ELECTRICAL AND OPTICAL FIBRE CABLE RACEWAY SYSTEMS
1 SCOPE 1.1 The requirements in this Standard apply to non-metallic raceway systems used to enclose optical fibre cables, communication cables and electrical wires and cables with combustible insulation and jackets that are rated FT4 and higher designed for use in accordance with CSA C22.1, Canadian Electrical Code, Part 1, Safety Standard for Electrical Installations, and the National…
Éditeur :
ULC
Statut :
Norme
Date de publication :
2014-10-31
Code(s) de l'ICS :
13.220.20; 29.060.20
Electrical quick-connect terminals
1 Scope 1.1 This standard applies to quick-connect terminals, both connectors and tabs, having nominal widths of 2.8, 3.2, 4.8, 5.2, and 6.3 mm (0.110, 0.125, 0.187, 0.205, and 0.250 in). They are intended for internal wiring connections in electrical equipment and for the field termination of conductors to electrical equipment in accordance with Part I of the Canadian Electrical Code, C22.1…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
2014-09-30
Code(s) de l'ICS :
01
Fixed capacitors for use in electronic equipment — Part 14: Sectional specification — Fixed capacito...
Canadian deviations International Standard IEC 60384-14:2013 (fourth edition) forms the basis for CAN/CSA-E60384-14, which contains the following deviations in addition to those shown in CAN/CSA-E60384-1:14. [Replace all references to “IEC 60384-1” with “CAN/CSA-E60384-1”] 1 General 1.1 Scope [Add the following] This Standard covers the above-noted products that are intended to be…
Éditeur :
CSA
Statut :
Norme
Date de publication :
2014-09-30
Code(s) de l'ICS :
31.060.10
STANDARD FOR ABOVEGROUND STEEL TANKS FOR FUEL OIL AND LUBRICATING OIL
SCOPE 1.1 This Standard covers the design and construction of aboveground steel non-pressure tanks intended for installation inside or outside buildings and for the storage of: A Combustible liquid intended to be used as heating fuel and/or generator fuel; and B Lubricating oil. NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or generator fuel. For tanks…
Éditeur :
ULC
Statut :
Norme
Date de publication :
2014-09-30
Code(s) de l'ICS :
23.020.10; 75.160.20
STANDARD FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
1 SCOPE 1.1 Except as described in Clause 1.7, these minimum requirements cover single and double wall cylindrical steel, non-pressure tanks of the horizontal type that are used for the underground storage of flammable liquids and combustible liquids, that are compatible with the material of construction. 1.2 These minimum requirements cover double wall tanks with provision for leak detection…
Éditeur :
ULC
Statut :
Norme
Date de publication :
2014-09-30
Code(s) de l'ICS :
23.020.10
STANDARD FOR FIBRE REINFORCED PLASTIC UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
1 SCOPE 1.1 This Standard sets forth minimum design and construction requirements for fibre reinforced plastic, non-pressure tanks that are used for the underground storage of flammable and combustible liquids, such as: A Petroleum products, including petroleum hydrocarbon fuels with low bio-blends, per specifications, and similar flammable or combustible liquid petroleum derivatives, such…
Éditeur :
ULC
Statut :
Annulée
Date de publication :
2014-09-30
Code(s) de l'ICS :
23.020.10
STANDARD FOR INTERNAL RETROFIT SYSTEMS FOR UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
1 SCOPE 1.1 This Standard provides minimum requirements for nonmetallic internal retrofit systems intended for field installation in underground tanks for the storage of flammable and combustible liquids, such as: A Petroleum products, including petroleum hydrocarbon fuels with low bio-blends per specifications and similar flammable or combustible liquid petroleum derivatives, such as fuel…
Éditeur :
ULC
Statut :
Norme
Date de publication :
2014-09-30
Code(s) de l'ICS :
23.020.10; 25.220.99
STANDARD FOR FIRE TESTED ABOVEGROUND TANK ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
1 SCOPE 1.1 This Standard covers minimum requirements for shop fabricated, aboveground fire tested tank assemblies intended for storage of flammable and combustible liquids that have a specific gravity not greater than 1.0 and that are compatible with the material of the tank. 1.2 Tank assemblies constructed to meet this standard are intended to withstand exposure to a 1 h hydrocarbon pool…
Éditeur :
ULC
Statut :
Norme
Date de publication :
2014-09-30
Code(s) de l'ICS :
23.020.10; 75.200
STANDARD FOR ABOVEGROUND NONMETALLIC TANKS FOR FUEL OIL AND OTHER COMBUSTIBLE LIQUIDS
1 SCOPE 1.1 This Standard covers minimum requirements for nonmetallic tanks of the atmospheric storage type from 227 to 2500 L intended primarily for the storage and supply of heating fuel for oil burning equipment, or alternately for the storage of diesel fuels for compression ignition engines and motor oils (new and used oil) for automotive service stations, in aboveground applications. 1.…
Éditeur :
ULC
Statut :
Annulée
Date de publication :
2014-08-31
Code(s) de l'ICS :
23.020.10; 23.020.10