The international community has decided to make this standard available only in
the English language version. It has been adopted as a National Standard of
Canada on this basis.
This National Standard of Canada is equivalent to International Standard
ISO/IEC 7810:1995.
1 Scope
This International Standard specifies the physical characteristics of
identification cards including card…
Information technology - Telecommunications and information exchange between
systems - High-level da...
The international community has decided to make this standard available only in
the English language version. It has been adopted as a National Standard of
Canada on this basis.
This National Standard of Canada is equivalent to International Standard
ISO/IEC 7776:1995.
1 Scope
This International Standard defines an application of the following HDLc
standards: ISO/IEC 3309, ISO/IEC 4335, ISO…
Methods of Sampling and Testing Tobacco
Determination of Benzo[a]pyrene in Total Particulate Matter...
1. SCOPe
1.1 This method is used to isolate and to determine the benzo[a]pyrene
(B[a]P) content in total particulate matter (TPM) of tobacco smoke.
1.2 The testing and evaluation of a product against this method may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety aspects…
1. SCOPE
1.1 This standard specifies the performance requirements for
remanufacturing toner cartridges for laser printers.
1.2 Some cartridges, because of their design and construction, may be more
suitable than others for remanufacturing. Moreover, the life of the
drum is dependent on the roughness of the paper used, the amount of
continuous use…
Determination of the Overall Envelope Airtightness of Buildings by the Fan
Pressurization Method Us...
1. SCOPE AND FIELD OF APPLICATIOn
1.1 This is a method for the determination of the overall airtightness of
building envelopes. It is not a method for determining the actual air
leakage which occurs through a building envelope under the natural
influences of wind and buoyancy pressures, or as a result of pressures
produced by the operation of air…
Methods of Testing Pulp and Paper
Physical Testing of Pulp Handsheets
1. PURPOSE AND SCOPE
1.1 This method deals with the testing of pulp handsheets prepared in
accordance with Technical Section CPPA Standards C.4 and C.5. The
tests are done in accordance with the appropriate CGSB standards and
Technical Section CPPA Standard testing methods, except where
modifications, as noted, are necessary to meet the special requirements…
Methods of Testing Pulp and Paper
Determination of Water Absorptiveness (Cobb Method)
1. PURPOSE AND SCOPE
1.1 This method is based upon the method of Cobb and Lowe (par. 11.3,
Reference 1), Cobb (par. 11.3, Reference 2), and work done by Egy (par.
11.3, Reference 3) and Codwise (par. 11.3, Reference 4). The sources
of these references are shown in the Notes section.
1.2 This method is best suited for determining water absorption of
non-…
Methods of Testing Pulp and Paper
The Laboratory Beating of Pulp
(Valley Beater Method)
1. PURPOSE AND SCOPE
1.1 This method is intended to indicate the response of the fibre to a
standardized mechanical treatment, as an index of its papermaking
quality.
1.2 This method may be used to define the papermaking quality of pulp by
subjecting it to treatment in a standardized laboratory beater
according to a definite schedule.
1.3 This method…
1. SCOPE
1.1 This standard applies to gates used in conjunction with chain link
fence used in commercial and industrial applications.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.
This document does not purport to address all the safety aspects…
1. Scope
1.1 This standard applies to inside, outside and depth micrometers with or
without digital readout. Special purpose micrometers are listed in an
Appendix.
1.2 Quantities and dimensions in this standard are given in metric units
with yard/pound equivalents, mostly obtained through soft conversion,
given in parentheses. The metric units shall be…