1.1 Scope
1.1.1 This Standard covers the construction, and performance (See Part III, DEFINITIONS) for gas-fired appliances with inputs up to and including 400 000 Btuh (117.23 kW) to determine their suitability for use at high altitude. The appliances include furnaces, boilers, room heaters, unit heaters, water heaters and such other appliances where field conditions indicate the necessity…
1. SCOPE
1.1 This standard applies to four grades of fluid suitable for use in
hydraulic systems other than aircraft hydraulic systems.
1.2 Fluids to this standard are intended for use in hydraulic systems,
including hydraulic variable speed gears and control mechanisms fitted with
packing glands of suitable oil-resistant synthetic rubber. These fluids are
not intended for use in…
1. SCOPE
1.1 This standard applies to three grades of oil for the lubrication of
refrigeration machinery.
1.2 Oils to this standard are suitable for the lubrication of refrigeration
machinery, including domestic-type refrigerators, drinking water coolers and
air-conditioning units, operating on halogenated hydrocarbon refrigerants,
carbon dioxide or ammonia, between temperatures of -…
Extreme Pressure Industrial Gear Type Lubricating Oil (ISO Viscosity Grade
150)
1.1
This standard applies to ISO VG 150, extreme pressure, industrial gear type
lubricant consisting of refined petroleum products with suitable additive
agents.
1.2
Lubricating oil to this standard is intended for use in heavily loaded
industrial and marine enclosed gear units, including worm types, where and ISo
VG 150 (A.G.M.A. 4E.P) grade oil is specified by the manufacturer.
Heavy-Duty Water-Wash-Resistant Grease (NLGI Grades No. 1 and No. 2)
1.1
This standard applies to two grades of heavy-duty, water-wash-resistant grease
possessing extreme pressure characteristics, good water resistance and superior
corrosion preventive properties.
1.2
Grease to this standard is intended for the general lubrication of antifriction
bearings, plain bearings, and sliding and rolling surfaces of equipment
operating under heavy-duty conditions…
Performance Options for Electric Storage Tank Water Heaters
Applies to electric storage tank water heaters that differ in
construction from those specified in CSA Standard
CAN/CSA-C191.0-M90 and includes sizes from 50 to 450 L (11 to 100
gal) inclusive.
Welding of Reinforcing Bars in Reinforced Concrete Construction
1. Scope
1.1 This Standard applies to
(a) the design, fabrication, and inspection of welded connections utilizing deformed reinforcing bars and to the certification of companies involved in such work;
(b) welding of deformed reinforcing bars (except for pre- stressing steel or for bar or rod mats for which the welding is covered by the manufacturing specification) either directly…
1. Scope
1.1
This Standard covers requirements for establishing and maintaining the
certification of welding inspection organizations. These requirements apply to
each welding inspection centre seeking certification.
1.2
This Standard provides for organizations to be certified for the inspection of
one or more product categories and for the use of one or more inspection
methods.
1…
1.1 This standard applies to two types of distillate fuels. Type A and Type b
which are suitable for high speed diesel engines, e.g. those that generally
operate at speeds in excess of 1200 r/min.
1.2 Type A is intended for use in engines such as urban transit buses and
passenger automobiles or when ambient temperatures require better low
temperature properties than Type B.
Type B is…
1. Scope
1.1 This Standard applies to single or multiple conductor, round, flat, or coiled appliance wiring material products for use as follows:
(a) Class I Internal: Group (A) - where not subjected to mechanical abuse. Group (B) - where may be subjected to mechanical abuse. (1) Wet (2) Oil; and
(b) Class II External: Group (A) - where not subjected to mechanical abuse. Group (B) -…
