Welding of Reinforcing Bars in Reinforced Concrete Construction
1. Scope
1.1 This Standard applies to
(a) the design, fabrication, and inspection of welded connections utilizing deformed reinforcing bars and to the certification of companies involved in such work;
(b) welding of deformed reinforcing bars (except for pre- stressing steel or for bar or rod mats for which the welding is covered by the manufacturing specification) either directly…
1. Scope
1.1
This Standard covers requirements for establishing and maintaining the
certification of welding inspection organizations. These requirements apply to
each welding inspection centre seeking certification.
1.2
This Standard provides for organizations to be certified for the inspection of
one or more product categories and for the use of one or more inspection
methods.
1…
1. Scope
1.1
This Standard outlines a means for certifying eligible welding inspectors by
examination in one of three levels. It describes the responsibilities
associated with each level and the basic technical functions of welding
inspectors. This Standard also outlines a means of registering welding
inspection trainees.
1.2
The certification document shall indicate the codes,…
1.1 This standard applies to two types of distillate fuels. Type A and Type b
which are suitable for high speed diesel engines, e.g. those that generally
operate at speeds in excess of 1200 r/min.
1.2 Type A is intended for use in engines such as urban transit buses and
passenger automobiles or when ambient temperatures require better low
temperature properties than Type B.
Type B is…
1. Scope
1.1 This Standard applies to single or multiple conductor, round, flat, or coiled appliance wiring material products for use as follows:
(a) Class I Internal: Group (A) - where not subjected to mechanical abuse. Group (B) - where may be subjected to mechanical abuse. (1) Wet (2) Oil; and
(b) Class II External: Group (A) - where not subjected to mechanical abuse. Group (B) -…
Rating the Performance of Residential Mechanical Ventilating Equipment
1. Scope
1.1 This Standard applies to supply and exhaust mechanical ventilation equipment. Examples of equipment covered by this Standard would be bathroom fans, kitchen fans, or ventilation equipment forming part of a central ventilation system.
1.2 The purpose of this Standard is to establish a uniform method
(a) to determine the air movement characteristics; and
(b) to…
Determining the Required Capacity of Residential Space Heating and Cooling Appliances
1. Scope
1.1
This Standard provides a calculation method for determining the output capacity
of a residential space heating appliance or group of appliances, and the output
capacity of a residential cooling appliance or group of appliances required to
maintain specified indoor environmental conditions under specified outdoor
environmental conditions.
1.2
This Standard also provides restrictions…
1.1 Applies to an inhibited phosphoric/oxalic acid type rust-stain remover
that, when diluted with water, will remove rust stains from painted ferrous
surfaces in the presence of small amounts of grease and oil.
1.2 Inhibited rust-stain remover covered by this standard is for use on
painted ferrous surfaces or other painted metal surfaces stained by rust, e.g.
ships and other marine…
1.1 Applies to black chemical finish for use on copper and copper alloy
surfaces.
1.2 Intended Uses - Finishes to this standard are for decorative or corrosion
retardant purposes on copper-alloy surfaces, except those used in food service
or water supply. The ability of the finish to retard corrosion is limited, and
so should be used on items not subject to corrosion, such as small…
