Rechercher

ISO/IEC 8484:2014 specifies the characteristics and location of a magnetic stripe on a savingsbook and the use of such savingsbooks for international interchange. Compatibility with international interchange systems is provided through the requirements of ISO/IEC 8484:2014, enabling a savingsbook with a magnetic stripe to be read and possibly encoded in a device that is compatible with reading…

ISO/IEC 8484:2014 specifies the characteristics and location of a magnetic stripe on a savingsbook and the use of such savingsbooks for international interchange. Compatibility with international interchange systems is provided through the requirements of ISO/IEC 8484:2014, enabling a savingsbook with a magnetic stripe to be read and possibly encoded in a device that is compatible with reading…

ISO 13095:2014 specifies two methods for characterizing the shape of an AFM probe tip, specifically the shank and approximate tip profiles. These methods project the profile of an AFM probe tip onto a given plane, and the characteristics of the probe shank are also projected onto that plane under defined operating conditions. The latter indicates the usefulness of a given probe for depth…

ISO/IEC 24771:2014 defines a protocol for the physical layer (PHY) and the data link layer in order to construct a reliable and high-speed data transmission network between devices on industrial sites such as factories and plants. This network specification provides a standardized protocol to provide a framework for various industrial devices to establish a simple, low-cost, energy-efficient, and…

ISO/IEC 24771:2014 defines a protocol for the physical layer (PHY) and the data link layer in order to construct a reliable and high-speed data transmission network between devices on industrial sites such as factories and plants. This network specification provides a standardized protocol to provide a framework for various industrial devices to establish a simple, low-cost, energy-efficient, and…

1 Scope 1.1 This Standard applies to ac and dc motors with inherent overheating protection designed to be used in accordance with the Canadian Electrical Code, Part I, as follows: a) motors with a voltage rating not exceeding 600 V and with a protective device connected in the motor circuit; b) impedance-protected motors with a voltage rating not exceeding 600 V; and c) motors with a…

1 Scope 1.1 This Standard applies to the materials, construction, and testing of one- to four-conductor cross-linked polyethylene and ethylene propylene rubber-insulated shielded power cables, rated 5–46 kV, that are used for the distribution of electrical energy under normal conditions of installation and service in indoor, outdoor, aerial, underground, or underwater locations. 1.2 This…

1 Scope 1.1 This Standard specifies a) methods to be used in measuring the energy and water consumption levels of household dishwashers; and b) maximum and high efficiency energy and water consumption limits for household dishwashers. 1.2 This Standard applies to household electrically-powered automatic dishwashers designed for a 60 Hz ac supply and a nominal system voltage not exceeding 250 V. 1…

1 Scope 1.1 This Standard applies to complete wind turbine electrical systems and associated electrical equipment intended for connection at not more than 46 kV and intended for use in accordance with the Canadian Electrical Code, Part I. Products covered by the scope of this Standard are subject to the requirements of CAN/CSA C22.2 No. 0. 1.2 This Standard applies to wind turbines of all…

1.1 General This Standard specifies requirements for the structural design of unreinforced, reinforced, and prefabricated masonry structures and components in accordance with the limit states design method of the National Building Code of Canada. This Standard also provides requirements for the structural design of prestressed masonry beams, walls, and columns in accordance with the limit…