Rechercher

IEC 62899-301-3:2024 defines measurement terms and methods related to the shape errors of printing plate rollers. Measurement terms include radius, total run-out, and three kinds of shape errors of printing plate rollers that are axial deviation, radial deviation, and cross-sectional deviation. The remaining shape error excluding the three errors mentioned above is defined as a residual shape…

This document defines the model and command set extensions to facilitate operation of zoned block devices. The clauses in this document, implemented in conjunction with the applicable clauses of SPC-6 and SBC-5, specify the standard command set for zoned block devices.

This document provides guidance on protective measures for consideration in fire risk reduction through machine design and operation and maintenance instructions for earth-moving machinery, as defined in ISO 6165, during their intended use. NOTE            The information in this document presumes that fire hazards for the normal applications anticipated for the machine family by the machine…

This document specifies characterization tests to be performed at the end of the fabrication of an array probe. It defines both methodology and acceptance criteria. This document is applicable to the following array probes used for ultrasonic non-destructive testing [phased array technique or signal processing technique, e.g. full-matrix capture (FMC) and total-focusing technique (TFM)] in…

This document defines the model and command set extensions to facilitate operation of zoned block devices. The clauses in this document, implemented in conjunction with the applicable clauses of SPC-6 and SBC-5, specify the standard command set for zoned block devices.

This document defines terms and definitions related to containers. NOTE            The different parts and components used in the construction of containers are specified in ISO 9897.

IEC TS 62271-318:2024 EXV contains both the international standard and its extended version (EXV). This extended version of the official IEC Standard is available in English only and provides the user with a comprehensive content of the Standard. IEC TS 62271-318:2024 EXV includes the content of the references made to IEC TS 62271-5:2024. IEC TS 62271-318:2024 specifies requirements for gas-…

IEC TS 62271-318:2024 specifies requirements for gas-insulated metal-enclosed switchgear in which the insulation is obtained, at least partly, by an insulating gas or gas mixture other than air at atmospheric pressure, for direct current of rated voltages including and above 100 kV, for indoor and outdoor installation. This document includes rules for service conditions, ratings, design, and…

This document identifies the information needed to ensure that a sample has been selected, processed, handled, and stored in a manner consistent with the analysis objectives, and to ensure the reliability and reproducibility of the surface analyses. Such information is also an important component of sample data record books, datasheets, certificates of analysis, reports, and other publications.…

This document defines a set of environmental performance evaluation (EPE) data classes, including their properties. It is applicable to entire manufacturing facilities or to parts of a manufacturing facility. This document applies to manufacturing systems including discrete, batch and continuous control, which are defined in IEC 62264-1. The following are outside the scope of this document…