Rechercher

1 Scope 1.1 This Standard specifies minimum design and material requirements as well as manufacturing practices and markings for prefabricated septic tanks, sewage holding tanks, and effluent chambers made of a) steel; b) concrete; c) fibreglass-reinforced plastic (FRP); d) reaction-injection moulded thermosets; and e) polyvinylchloride (PVC), polypropylene (PP), polyethylene (PE), or…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 specifies safety requirements for electrically operated commercial refrigerating appliances and ICE-MAKERS that have an incorporated motor-compressor or that are supplied in two units for assembly as a single appliance in accordance with the instructions (split system). NOTE 101 Examples of appliances that are…

1 Scope 1.1 In scope This Standard specifies performance requirements for respirators that operate in the air filtering mode for filtering particulate matter. 1.2 Out of scope This Standard does not address the following: a) respirators with filters for gas/vapour removal, which will be covered in a future edition; b) respirators that operate in the atmosphere-supplying mode, or…

1 Scope 1.1 This Standard specifies requirements for the design and performance of complete active fall-protection systems, including travel-restraint and vertical and horizontal fall-arrest systems. This Standard is intended for engineers with expertise in designing fall-protection systems. 1.2 This Standard does not specify design or performance requirements for fall-arrest equipment or…

1 Scope 1.1 General This Standard addresses the special requirements of plumbing systems pertinent to the design, construction, operation, and maintenance of health care facilities (HCFs). This Standard specifies requirements for the following in HCFs: a) water supply systems, including cold water systems and hot water systems; b) plumbing fixtures and fittings; c) drainage systems; d)…

This document provides a list of basic information attributes for the OMEs: —    examples of information attributes are given; —    standards that can define these information attributes are discussed in Annex A.

IEC 62999:2016+A1:2021 applies to electrical underfloor heating of dwellings and all other buildings whose use corresponds to dwellings or is at least similar, having a maximum load bearing in use of 4 kN/m2. This Standard defines the main characteristics of electrical underfloor heating and establishes the method of testing of these characteristics as information for the user. This Standard does…

This document defines a data set of ink value combinations that can be used to characterize four-colour process printing. This data set is not optimized for any printing process or application area but is robust enough for all general applications. While it is primarily aimed at process colour printing with CMYK inks, it can also be used with any combination of three chromatic inks and a dark ink…

1 Scope 1.1 These requirements cover single pole locking-type separable attachment plugs, cord connectors, panel inlets, and panel outlets, adapters, and accessories, rated up to a maximum of 800 amperes and up to 600 volts ac or dc and not intended for connection or disconnection under load conditions. 1.2 These devices are intended to provide power from feeders or branch circuits, or are…

This document specifies the data model that is related to various spatial information for common use between the UAS service provider and the system for operation control, e.g. UTM. This document specifies the names of the items for the data model, while the communication architecture and responsibilities of actors to define the items are not included.