CSA IEC 61000-4-9:22
1 Scope and object
This part of IEC 61000 specifies the immunity requirements, test methods, and range of
recommended test levels for equipment subjected to impulse magnetic disturbances mainly
encountered in:
– industrial installations,
– power plants,
– railway installations,
– medium voltage and high voltage sub-stations.
The applicability of this standard to equipment installed in different locations is determined by
the presence of the phenomenon, as specified in Clause 4.
This standard does not consider disturbances due to capacitive or inductive coupling in cables
or other parts of the field installation. Other IEC standards dealing with conducted
disturbances cover these aspects.
The object of this standard is to establish a common reference for evaluating the immunity of
electrical and electronic equipment when subjected to impulse magnetic fields. The test
method documented in this part of IEC 61000 describes a consistent method to assess the
immunity of an equipment or system against a defined phenomenon.
NOTE As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the IEC.
As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity
test standard is applied or not, and if applied, they are responsible for determining the appropriate test levels and
performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committees in the
evaluation of the value of particular immunity test levels for their products.
This standard defines:
– a range of test levels;
– test equipment;
– test setups;
– test procedures.
The task of the described laboratory test is to find the reaction of the equipment under test
(EUT) under specified operational conditions to impulse magnetic fields caused by switching
and lightning effects.
OEN:
CSA
Langue:
English
Code(s) de l'ICS:
33.100.20
Statut:
Norme
Date de Publication:
2022-07-31
Numéro Standard:
CSA IEC 61000-4-9:22