Rechercher

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric pumps for liquids having a temperature not exceeding 90 °C, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 This Standard covers both permanently…

Scope 1.1 This Standard sets forth the minimum requirements for containment sumps, and associated sump fittings and accessories (products) intended for below-grade, or at-grade, or above-grade use as an enclosure for the housing of, and access to, underground piping, connector piping, and other fueling system components (such as pumps, valves, sensors, wiring, etc.), in addition to temporary…

Scope 1.1 These requirements apply to ultraviolet germicidal irradiation (UVGI) equipment and systems intended for installation and use in accordance with the U.S. National Electrical Code (NEC), NFPA 70 and in accordance with the Canadian Electrical Code, Part I (CEC), CSA C22.1. These requirements cover: a) UV Germicidal Equipment – These devices emit uncontained UV energy into the…

Scope 1.1 This Standard sets forth the minimum requirements for cover primary, secondary, and coaxial types of flexible connector pipes intended for short length transfer and containment of the specific flammable and combustible liquids (or vapors thereof) identified in this Standard, at commercial (public) or fleet (private) automotive motor vehicle fueling stations or similar fuel…

Domaine d’application 1.1 La présente norme fournit les exigences minimums pour les types principaux, secondaires et coaxiaux de tuyaux de raccordement flexibles destinés au transfert et à la rétention sur de courtes distances de liquides (ou vapeurs) inflammables et combustibles spécifiques, comme décrit dans la présente norme, dans les postes de ravitaillement commerciaux (publics) ou de…

1 Scope 1.1 Inclusions This Standard applies to newly produced automatic valves constructed entirely of new, unused parts and materials. These valves can be individual automatic valves or valves utilized as parts of automatic gas ignition systems. This Standard also applies to commercial/industrial safety shutoff valves herein after referred to as C/I valves. Components performing functions…

1 Scope 1.1 This standard applies to quick-connect terminals, both connectors and tabs, having nominal widths of 2.8, 3.2, 4.8, 5.2, and 6.3 mm (0.110, 0.125, 0.187, 0.205, and 0.250 in). They are intended for internal wiring connections in electrical equipment and for the field termination of conductors to electrical equipment in accordance with Part I of the Canadian Electrical Code, CSA…

1 Scope This National Standard of Canada: • determines the flame resistance of soft floor coverings when exposed to an ignition source (methenamine for timed burning tablet) under specified conditions; • establishes sampling plans and procedures to determine the acceptability with respect to the flame resistance of soft floor coverings using a sequential sampling procedure; • describes a…

Scope 1.1 This Standard covers requirements as related to the following: a) Discrete electrical control units and accessories for fire alarm systems including smoke control, releasing, Building System Information Unit (BSIU), and emergency communication systems; b) Electrically- and electronically-operated amplifiers that provide speech communication and distinctive sounds in conjunction…

Domaine d’application 1.1 La présente norme vise les exigences relatives aux éléments suivants : a) Postes de contrôle électriques discrets et accessoires pour les systèmes d’alarme incendie, y compris le système de désenfumage, le système de déclenchement, le Building System Information Unit (BSIU) et les systèmes de communication d’urgence; b) Amplificateurs électriques et électroniques…