Information technology - Security techniques - Check character systems
ISO/IEC 7064:2002 specifies a set of check character systems capable of protecting strings against errors which occur when people copy or key data. The strings may be of fixed or variable length and may have character sets which are
numeric (10 digits: 0 to 9);alphabetic (26 letters: A to Z);alphanumeric (letters and digits).
Embedded spaces and special characters are ignored.
ISO/IEC 7064:2002…
Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 2: Measurem...
ISO 15616-2:2003 is applicable to the measurement of the precision of the manipulation system, the positioning accuracy, the repeatability of positioning and the trajectory exactness for the acceptance testing of CO2-laser beam machines for high quality welding and cutting in two operation directions in accordance with ISO 15616-1:2003.
This International Standard specifies testing procedure and…
Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibrat...
ISO 15616-3:2003 is applicable to the measurement of the process-oriented gas parameters for the acceptance tests for CO2-laser beam machines for high quality welding and cutting in two operation directions in accordance with ISO 15616-1:2003.
This international Standard specifies examination procedures for instruments used for control of process-oriented gas parameters.
Iron ores — Determination of phosphorus content — Titrimetric method
ISO 2599:2003 specifies a titrimetric method for the determination of the phosphorus content of iron ores, using hexaammonium heptamolybdate (ammonium molybdate).
This method is applicable to a concentration range of 0,10 % (m/m) to 5,0 % (m/m) of phosphorus in natural iron ores, and iron ore concentrates and agglomerates including sinter products.
This International Standard provides a quality…
Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 1: General ...
ISO 15616-1:2003 is applicable to CO2-laser beam machines for welding and cutting in two operating directions.
The main purpose of this International Standard is to provide requirements for acceptance testing of CO2-laser beam machines prior to or during installation at the user's premises. The acceptance tests are used to document the ability of CO2-laser beam machines to produce welded…
Safety of power transformers, power supply units and similar - Part 1: General requirements and test...
This National Standard of Canada is based on International Standard CEI/IEC 61558-1:1997 (edition 1.1, 1998-07).
1 Scope
1.1 This International Standard deals with all aspects of safety (such as electrical, thermal and mechanical) of:
a) Stationary or portable, single-phase or polyphase, air-cooled (natural or forced) isolating and safety isolating transformers, associated or otherwise, having…
Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for...
This National Standard of Canada is based on International Standard CEI/IEC 61558-2-5:1997 (first edition, 1997-12).
1 Scope
Replacement:
This part 2-5 of IEC 61558 applies to shaver supply units, embodying one or more socketoutlets and a single phase air cooled isolating transformer, having a rated supply voltage
not exceeding 250 V a.c., a rated output not less than 20 VA and not…
Safety of power transformers, power supply units and similar - Part 2: Particular requirements for s...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61558-2-6:1997 (first edition, 1997-02).
1 Scope
Replacement:
This part 2 of IEC 61558 applies to stationary or portable, single-phase or polyphase, aircooled safety isolating transformers, associated or otherwise, having a rated supply
voltage not exceeding 1000 V a.c. and rated frequency not exceeding 500…
Safety of power transformers, power supply units and similar devices - Part 2-13: Particular require...
This National Standard of Canada is based on International Standard CEI/IEC 61558-2-13:1999 (first edition, 1999-10).
1 Scope
Replacement:
This International Standard deals with all aspects of safety such as electrical, thermal and mechanical.
This part 2-13 of IEC 61558 applies to stationary or portable, single-phase or polyphase, aircooled (natural or forced), independent or…
Hard-Drawn Aluminum Wire for Overhead Line Conductors
This National Standard of Canada is based on International Standard CEI/IEC 889:1987 (first edition, 1987-11).
1 Scope
This Standard covers the electrical and mechanical characteristics of round wires of aluminium 1350-H19, having diameters of 1.25 to 6.50 mm, intended for stranding into overhead conductors to be used for electrical purposes.