Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibrat...
ISO 15616-3:2003 is applicable to the measurement of the process-oriented gas parameters for the acceptance tests for CO2-laser beam machines for high quality welding and cutting in two operation directions in accordance with ISO 15616-1:2003.
This international Standard specifies examination procedures for instruments used for control of process-oriented gas parameters.
Iron ores — Determination of phosphorus content — Titrimetric method
ISO 2599:2003 specifies a titrimetric method for the determination of the phosphorus content of iron ores, using hexaammonium heptamolybdate (ammonium molybdate).
This method is applicable to a concentration range of 0,10 % (m/m) to 5,0 % (m/m) of phosphorus in natural iron ores, and iron ore concentrates and agglomerates including sinter products.
This International Standard provides a quality…
Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 1: General ...
ISO 15616-1:2003 is applicable to CO2-laser beam machines for welding and cutting in two operating directions.
The main purpose of this International Standard is to provide requirements for acceptance testing of CO2-laser beam machines prior to or during installation at the user's premises. The acceptance tests are used to document the ability of CO2-laser beam machines to produce welded…
Safety of power transformers, power supply units and similar - Part 1: General requirements and test...
This National Standard of Canada is based on International Standard CEI/IEC 61558-1:1997 (edition 1.1, 1998-07).
1 Scope
1.1 This International Standard deals with all aspects of safety (such as electrical, thermal and mechanical) of:
a) Stationary or portable, single-phase or polyphase, air-cooled (natural or forced) isolating and safety isolating transformers, associated or otherwise, having…
Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for...
This National Standard of Canada is based on International Standard CEI/IEC 61558-2-5:1997 (first edition, 1997-12).
1 Scope
Replacement:
This part 2-5 of IEC 61558 applies to shaver supply units, embodying one or more socketoutlets and a single phase air cooled isolating transformer, having a rated supply voltage
not exceeding 250 V a.c., a rated output not less than 20 VA and not…
Safety of power transformers, power supply units and similar - Part 2: Particular requirements for s...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61558-2-6:1997 (first edition, 1997-02).
1 Scope
Replacement:
This part 2 of IEC 61558 applies to stationary or portable, single-phase or polyphase, aircooled safety isolating transformers, associated or otherwise, having a rated supply
voltage not exceeding 1000 V a.c. and rated frequency not exceeding 500…
Safety of power transformers, power supply units and similar devices - Part 2-13: Particular require...
This National Standard of Canada is based on International Standard CEI/IEC 61558-2-13:1999 (first edition, 1999-10).
1 Scope
Replacement:
This International Standard deals with all aspects of safety such as electrical, thermal and mechanical.
This part 2-13 of IEC 61558 applies to stationary or portable, single-phase or polyphase, aircooled (natural or forced), independent or…
Hard-Drawn Aluminum Wire for Overhead Line Conductors
This National Standard of Canada is based on International Standard CEI/IEC 889:1987 (first edition, 1987-11).
1 Scope
This Standard covers the electrical and mechanical characteristics of round wires of aluminium 1350-H19, having diameters of 1.25 to 6.50 mm, intended for stranding into overhead conductors to be used for electrical purposes.
Braking systems of rubber-tired machines - Performance requirements and test procedure
This National Standard of Canada is based on International Standard ISO 3450:1996, (third edition, 1996-04-01).
1 Scope
This International Standard specifies minimum performance and test criteria for brake systems to enable uniform assessment of the braking capability of earth-moving machinery which operates on work sites or travels on public roads. Service secondary, and parking brake systems…
Safety of Laser Products - Part 1: Equipment Classification, Requirements and User's Guide
This National Standard of Canada is based on International Standard IEC 60825-1:1993 + A1:1997 + A2:2001, edition 1.2, 2001-08.
1.1 Scope
IEC 60825-1 is applicable to safety of laser products. For convenience it is divided into three separate sections: Section One (General) and the annexes; Section Two (Manufacturing requirements); and Section Three (User's guide* ).
A laser product may…