1 Scope
1.1 This Part is intended to be read together with the Standard for Fuseholders – Part 1: General
Requirements, hereafter referred to as Part 1. The titles of the Clauses in this Part correspond to the
similarly titled Clauses in Part 1. The requirements of Part 1 apply unless modified by this Part. For the
Part 1 requirements, refer to the Standard for Fuseholders – Part 1: General…
Medical electrical equipment — Part 2-43: Particular requirements for the basic safety and essential...
Scope
Replacement:
This document applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of both FIXED and
MOBILE X-RAY EQUIPMENT declared by the MANUFACTURER to be suitable for RADIOSCOPICALLY
GUIDED INTERVENTIONAL PROCEDURES, hereafter referred to as INTERVENTIONAL X-RAY EQUIPMENT.
Its scope excludes, in particular:
– equipment for RADIOTHERAPY;
– equipment for COMPUTED TOMOGRAPHY;
–…
Valeurs minimales de rendement pour les transformateurs de distribution à isolant liquide
1 Domaine d’application
1.1 Généralités
Cette norme définit les valeurs de rendement énergétique pour les transformateurs de distribution à isolant liquide. La méthode du coût d’exploitation total (CET) est le moyen recommandé pour arriver à ces valeurs de rendement énergétique, particulièrement pour les services publics d’électricité. Cette norme définit aussi une méthode optimale pour les…
Pilotes de diodes électroluminescentes — Caractéristiques de performance
Domaine d’application
Cette norme fournit les spécifications et les caractéristiques de fonctionnement des pilotes
électroniques non intégrés (alimentations) pour les dispositifs, barrettes ou systèmes à DEL destinés aux
applications d’éclairage général, y compris à l’intérieur et à l’extérieur, ainsi qu’à des cas spécifiques,
tels que l’alimentation électrique par Ethernet (PoE) et les…
Household and similar electrical appliances — Safety — Part 2-41: Particular requirements for pumps ...
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric pumps for liquids having a
temperature not exceeding 90 °C, intended for household and similar purposes, their rated
voltage being not more than 250 V for single-phase appliances and 480 V for other
appliances.
NOTE 101
This Standard covers both permanently…
Lamp controlgear — Part 1: General and safety requirements Appareillages de lampes — Partie 1 : ...
1 Scope
This Standard specifies general and safety requirements for lamp controlgear designed to be installed
on branch circuits not exceeding 600 V nominal between conductors and used in accordance with
CSA C22.1, Canadian Electrical Code, Part I.
This standard also covers lamp controlgear for lamps which are not yet standardized.
Tests dealt with in this standard are type tests.…
1 Domaine d’application
1.1 Inclusions
Cette norme définit les exigences relatives à la performance, à l’installation et à l’application, ainsi qu’à la vérification de la performance des systèmes de ventilation mécanique. Cette norme s’applique aux systèmes pouvant fournir des débits contrôlés minimaux d’air neuf dans les espaces habitables des logements :
a)
qui entrent dans le domaine d’…
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential...
IEC 60601-2-35:2020+AMD1:2023 CSV applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this document. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title…
