ISO 12004-2:2021

Metallic materials — Determination of forming-limit curves for sheet and strip — Part 2: Determination of forming-limit curves in the laboratory

This document specifies testing conditions for use when constructing a forming-limit curve (FLC) at ambient temperature and using linear strain paths. The material considered is flat, metallic and of thickness between 0,3 mm and 4 mm. NOTE The limitation in thickness of up to 4 mm is proposed, giving a maximum allowable thickness to the punch diameter ratio.

OEN:

ISO

Langue:

English

Code(s) de l'ICS:

77.040.10

Statut:

Publié

Date de Publication:

2021-02-09

Numéro Standard:

ISO 12004-2:2021