CSA C22.2 No. 4248.6:24

1 Scope 1.1 This Part is intended to be read together with the Standard for Fuseholders – Part 1: General Requirements, hereafter referred to as Part 1. The titles of the Clauses in this Part correspond to the similarly titled Clauses in Part 1. The requirements of Part 1 apply unless modified by this Part. For the Part 1 requirements, refer to the Standard for Fuseholders – Part 1: General Requirements, NMX-J-009- 4248/1-ANCE / CSA C22.2 No. 4248.1 / UL 4248-1. 1.2 These requirements cover fuseholders intended for use with Class H Fuses as described in NMX-J- 009/248/6-2000-ANCE, CSA C22.2 No. 248.6, UL 248-6, Low-Voltage Fuses – Part 6: Class H Non- Renewable; and NMX-J-009/248/7-2000-ANCE, CSA C22.2 No. 248.7, UL 248-7, Low-Voltage Fuses – Part 7: Class H Renewable Fuses. 1.3 Fuseholders also intended for fuses covered by other Parts shall also comply with the applicable fuseholder requirements for that Part. 2 Referenced Publications 2.1 Any undated reference to a code or standard appearing in the requirements of this Standard shall be interpreted as referring to the latest edition of that code or standard. 2.2 When a reference is made to a code or standard, the product shall comply with the code or standard of the country in which the product is intended to be used. 2.3 Throughout this Standard, the CSA standard references apply to products intended for use in Canada, the ANCE NMX standard references apply to products intended for use in Mexico, and the UL standard references apply to products intended for use in the United States. Combined references are separated by a slash (“ / ”) to denote the difference between the applicable requirements specified for use in Canada, Mexico, and the United States. 2.4 The following publications are referenced in this Standard: