CAN/ULC-S716.1:2019
1 Scope
1.1 This Standard outlines requirements for Exterior Insulation and Finish Systems (EIFS) installed in
accordance with CAN/ULC-S716.2 and designed in accordance with CAN/ULC-S716.3, and used in
combination with a drained air space as an exterior wall cladding system.
1.2 The EIFS wall cladding system is comprised of a water resistive barrier assembly, thermal insulation
boards, an attachment method to secure the system to the substrate, a glass fibre reinforcing mesh
embedded in a base coat on the face of the thermal insulation boards and a finish coat.
1.3 The use of mechanical fasteners is outside the scope of this Standard, but is acceptable as a
complement and/or as an alternate to adhesive for attachment.
1.4 In EIFS, the thermal insulation boards support the base coat with integral glass fibre reinforcing
mesh. Systems where the reinforcement is the supporting element of the rendering, e. g., conventional
stucco, are not covered by this Standard.
1.5 This document does not purport to address all the health and safety aspects associated with its use.
Anyone using this Standard has the responsibility to consult the appropriate authorities and to establish
health and safety practices, in conjunction with any existing applicable regulatory requirements, prior to its
use.
OEN:
ULC
Langue:
English
Code(s) de l'ICS:
91.120.10
Statut:
Norme
Date de Publication:
2019-03-31
Numéro Standard:
CAN/ULC-S716.1:2019