CSA N290.6-16

1.1 This Standard provides requirements for the design and qualification of components for the monitoring and display of nuclear power plants (NPP) and irradiated fuel bay safety functions in the event of a design basis accident (DBA) or a design extension condition (DEC). Note: The requirements for a DBA and those for a DEC might differ. Where requirements differ for a DBA and a DEC, the difference is explicitly stated. 1.2 This Standard applies to existing NPPs and new NPPs. Notes: 1) The requirements for new plants and existing plants might differ. Where requirements differ for new plants and existing plants, the difference is explicitly stated. 2) This Standard may provide guidance for nuclear facilities other than NPPs, using a graded approach. 1.3 This Standard addresses the specific requirements for the monitoring and display of safety functions under DECs. Note: Requirements and guidance regarding DECs [as a subset of beyond design basis accidents (BDBAs)] are covered in CSA N290.16. 1.4 This Standard applies to components and systems that enable NPP staff, in the event of an accident, to a) monitor the plant safety functions; Note: The purpose of monitoring the plant safety functions is to guide operator actions that might be required as a part of the accident response. b) monitor plant conditions for the purposes of accident management; and Note: Accident management refers to specific actions taken within the NPP during the evolution of an accident to prevent escalation, mitigate consequences, and to achieve a long-term controlled stable state. Accident management actions are the responsibility of the plant operator. Refer to CNSC REGDOC-2.3.2 for further clarification. c) monitor parameters for the initiation of on-site and off-site emergency management. Note: Emergency management in this context refers to the overall coordinated response to, mitigation of, and recovery from a nuclear emergency. Emergency management is not concerned with the specific actions taken within the NPP to manage the accident (i.e., accident management as described above). Emergency management actions can be the responsibility of the operating organization or other jurisdictions (e.g., operator emergency response organizations, government bodies, emergency workers). Refer to CSA N1600 for guidance on nuclear emergency categorization and notification.