CAN/CSA-ISO/IEC 13874-97 (R2001)

Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Inter-exchange signalling protocol - Path replacement additional network feature
The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 13874:1995. 1 Scope This International Standard specifies the signalling protocol for the support of the Path Replacement additional network feature (ANF-PR) at the Q reference point between Private Integrated Services Network Exchanges (PINXS) connected together within a Private Integrated Services Network (PISN). ANF-PR is a feature which applies to an established call, allowing that call's connection between PINXs to be replaced by a new connection. The Q reference point is defined in ISO/IEC 11579-1. Service specifications are produced in three stages and according to the method specified in CCITT Recommendation I.130. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 13863. The signalling protocol for ANF-PR operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582. This International Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between ANF-PR and other supplementary services and ANFs. This International Standard is applicable to PINXs which can interconnect to form a PISN.
OEN:
CSA
Langue:
English
Code(s) de l'ICS:
35.120
Statut:
Annulée
Date de Publication:
1997-02-27
Numéro Standard:
CAN/CSA-ISO/IEC 13874-97 (R2001)