CAN/CSA-E730-1/2E-95

This National Standard of Canada is based on International Standard CEI/IEC 730-1:1993 (second edition), including Amendment 1:1994. 1 Scope and normative references 1.1 In general, this standard applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard applies to automatic electric controls using NTC or PTC thermistors, additional requirements for which are contained in annex J. This Standard applies to the safety of such equipment designed to be installed and used in accordance with the rules of the Canadian Electrical Code (CEC), Part 1. Note: Manufacturers designing products for use in Canada may find a helpful summary of the equipment-related requirements of the CEC, Part 1, in CSA Publication Spe-2000. 1.1.1 This standard applies to the inherent safety; to the operating values, operating times, and operating sequences where such are associated with equipment safety; and to the testing of automatic electrical control devices used in, or in association with, household or similar equipment. This standard is also applicable to controls for appliances within the scope of IEC 335-1. Throughout this standard the word "equipment" means "appliance and equipment." This standard does not apply to automatic electrical controls designed exclusively for industrial applications. This standard is also applicable to individual controls utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs. Automatic electrical controls for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. See also annex J. 1.1.2 This standard applies to automatic electrical controls, mechanically or electrically operated, responsive to or controlling such characteristics as temperature, pressure, passage of time, humidity, light, electrostatic effects, flow, or liquid level, current, voltage or acceleration. It also applies to controls incorporating electronic parts. 1.1.3 This standard applies to starting relays, which are a specific type of automatic electrical control, designed to switch the starting winding of a motor. Such controls may be built into, or be separate from, the motor. 1.1.4 This standard applies to manual controls when such are electrically and/or mechanically integral with automatic controls. Requirements for manual switches not forming part of an automatic control are contained in IEC 1058-1. 1.2 This standard applies to controls with a rated voltage not exceeding 660 v and with a rated current not exceeding 63 A. 1.3 This standard does not take into account the response value of an automatic action of a control, if such a response value is dependent upon the method of mounting the control in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate household equipment standard or as determined by the manufacturer shall apply. 1.4 This standard applies also to controls incorporating electronic devices, requirements for which are contained in annex H.