IEC 62314:2022

IEC 62314:2022 applies to particular all-or-nothing electrical relays denominated solid-state relays intended for performing electrical operations by single step function changes to the state of electric circuits between the OFF-state and the ON-state and vice versa. This document deals with solid-state relays which are intended for incorporation in other products or equipment. As such, solid-state relays are considered to be components and this document defines the basic safety-related and functional requirements for solid-state relays as stand-alone components. Such solid-state relays are incorporated in products or equipment which themselves comply with the relevant product and/or application standard(s) to meet their intended application. Solid state relay as apparatus: Where the solid-state relay is specified as apparatus with a function to the end-user, requirements on EMC are given in this document. Solid state relay as component: There are no EMC requirements for solid-state relays intended for incorporation into the equipment by the equipment manufacturer, because the performance strongly depends on the application into the equipment. The object of this document is to state: – the characteristics of solid-state relays – the requirements which apply to solid-state relays with reference to a) electrical safety; b) their operation and behaviour; c) their dielectric properties; d) EMC; – the tests verifying that the requirements have been met, and the test methods to be adopted; – the information to be given with the solid-state relay or in the product documentation. Solid-state switching devices with monolithic structures fall within the scope of IEC sub-committee 47E and are not covered in this document. Semiconductor controllers and contactors fall within the scope of the IEC 60947 series of standards – low-voltage switchgear and controlgear – developed by IEC subcommittee 121A and are not covered in this document. IEC 62314:2022 cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of load categories for DC load; b) addition of load category for self-ballasted lamp load; c) addition of "sockets" terminal; d) update of references; e) introduction of the requirement of EMC; f) restructuring of the whole document.