Rechercher

1 .1 This International Standard specifies a method of designating underexposed motion-picture negative and reversal type film requiring forced or push-processing development. 1.2 This International Standard does not specify the procedure used in achieving a forced development result. NOTE - An International Standard dealing with overexposed motionpicture film is being prepared.

1. Scope 1.1 This Standard applies to rigid unplasticized poly(vinyl chloride) conduit, elbows, bends, and couplings intended for use at a continuous operating temperature of 75°C for the installation of wires and cables in accordance with the Rules of the Canadian Electrical Code, Part I, for nonhazardous locations. Note: See Canadian Electrical Code, Rule 12-1204. 1.2 The products…

1. Scope 1.1 This Standard applies to nonmetallic conduit of rigid PVC, type EB1 for encasement in concrete or masonry and type DB2/ES2 for direct burial or encasement in concrete or masonry, and their associated fittings, in accordance with the Rules of the Canadian Electrical Code, Part I, for ordinary locations. 1.2 The conduits and associated fittings covered by this Standard are…

1. Scope 1.1 This Standard applies to cables and cable glands intended for (a) fixed wiring in Class I, Groups A, B, C, and D; Class II, Groups E, F, and G; and Class III hazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I; and (b) fixed wiring and portable cables in gaseous mines in accordance with the Rules of the Canadian Electrical Code, Part V; and…

1. SCOPE 1.1 This Standard contains requirements for non-threaded, quick-connect couplings of the internal lug design for use in fire protection service. (See Appendix A.) 1.2 The couplings are intended for use with fire hose in the following standard sizes: 38 mm, 65 mm, 100 mm, 125 mm and 150 mm. 1.3 This Standard also contains requirements for the non-threaded, quick-connect portion of…

This PDF includes Errata #1-#5. Part 1 - Design in Aluminum 1.1 Scope 1.1.1 Part 1 of this Standard provides design requirements for all components made from wrought aluminum that are required to carry load. 1.1.2 In Part 1 it is presupposed that the loads, load factors, and limit states have been established separately, and Part 1 therefore covers only the proportioning of…

1.1 This Standard stipulates the minimum requirements that must be met and adhered to by a company wishing to be certified and to maintain certification for fusion welding of steel structures, performed as part of the fabrication, fabrication and erection, or erection thereof. Note: In the case of a company having more than one plant, branch, or division, each plant shall be certified and…

1. Scope 1.1 This standard describes the formats, rules, and procedures for the encoding of alphanumeric text and pictorial information for videotex and teletext¹ applications. (¹The term teletext (not yet adopted by CCIR) is commonly used to refer to a broadcast television videotex service. It is different from teletex, a term officially adopted by CCITT to define a specific type of…

1. Scope 1.1 This Standard applies to cord connected and direct plug-in transformers for use indoors, designed to be used on a nominal 120-V branch circuit in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I, and intended to supply power for the operation of extra-low voltage toys or hobby equipment. For convenience, the shorter term transformer is…

1. Scope and Application 1.1 Scope This Standard describes requirements and test methods for materials, dimensions, workmanship, pipe stiffness, quality control, joining systems, and a form of marking for SDR 41, Type IPS PVC sewer pipe and fittings. 1.2 Application Pipe and fittings made to this Standard are intended for non-pressure drainage of sewage and other liquid wastes in the…