Rechercher

1. SCOPE 1.1 These requirements cover galvanic protection systems for cylindrical horizontal steel tanks of the non-pressure type which are: A Manufactured in accordance with the applicable requirements of CAN/ULC-S603, Standard for Steel Underground Tanks for Flammable and Combustible Liquids, ; and B Used for the underground storage of flammable…

1. Scope 1.1 This Standard pertains to wood-based panel products, designed and manufactured for protected construction uses as roof sheathing, wall sheathing, and floor sheathing in light frame construction applications. Construction Sheathing panels primarily comprise three types: all wood veneer; part veneer and part wood furnish; and all wood furnish. 1.2 This Standard requires…

Preface This is the first edition of CSA Standard CAN/CSA-Z243.58-92, Information Technology Vocabulary. This bilingual dictionary was developed to communicate and standardize information technology usage in Canada for both specialists and users. The Canadian Advisory Committee to SC1 of ISO/IEC JTC1 felt that a publication of this nature could be used as a medium for standardizing…

Describes requirements and test methods for materials, dimensions, workmanship, pipe stiffness, quality control, joining systems, and a form of marking for PVc (polyvinyl chloride) profile sewer pipe and fittings of pipe stiffness PS70 and PS320 based on controlled inside diameter. Notes: (1) Pipe and fittings produced to meet the requirements of this Standard should be installed in…

1. SCOPE 1.1 These requirements cover single and double wall cylindrical steel tanks of the horizontal, non-pressure type that are used for the underground storage of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar products. 1.2 Part A of these requirements cover single wall tanks. 1.3 Part B of these requirements cover double wall tanks with…

1.1 This Standard specifies the minimum requirements for a medical oxygen concentrator central supply system for use as a source of supply in a nonflammable medical gas piping system which complies with CSA Standard Z305.1. 1.2 Small, portable, "domiciliary" units are not included within the scope of this Standard. 1.3 This Standard also specifies minimum performance and…

Applies both to capacitor units and capacitor banks intended to be used connected in series with an a.c. transmission or distribution line or circuit forming part of an a.c. power system having a frequency of 15 Hz to 60 Hz. The series capacitor units and banks are usually intended for high voltage power systems. This standard is applicable to the complete voltage range. Note:For internal fuses…

1. SCOPE AND APPLICATIOn This Standard applies generally to steel structures, and structural steel components in other structures. The analysis, design, detailing, fabrication, and erection requirements contained in the Standard normally provide a satisfactory level of structural integrity for most steel structures. Clause 1.2 states that requirements for some specific types of…

1. Scope 1.1 This Standard applies to the factory installation of propane appliances and equipment in park model trailers. Note: CGA Standard CAN1-B149.2 was used as a basis for the preparation of this Standard and should be consulted for installations not covered here.

This National Standard of Canada is equivalent to International Standard ISO 6683-1981. This International Standard establishes the minimum performance requirements for seat belts and the fastening elements of seat belts necessary to restrain an operator or rider within a roll-over protective structure (ROPS) in the event of a machine roll-over as defined in ISO 3471. NOTE - Dynamic seat…