Rechercher

Covers specifications and test methods for unused mineral insulating oils. It applies to oil delivered to the agreed point and time of delivery, intended for use in transformers, switchgear and similar electrical equipment in which oil is required as an insulant and for heat transfer. These oils are obtained by distillation and refining of crude petroleum. Oils with and without additives are…

This CSA Standard is a common standard with UL 486A-486B, first edition, and NMX-J-543-ANCE-03, first edition. 1 Scope 1.1 This Standard applies to connectors for use with all alloys of copper or aluminum conductors, or both, for providing contacts between current-carrying parts, in accordance with the Canadian Electrical Code, Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in…

1 Scope 1.1 This Standard applies to single- and multiple-conductor fire alarm and signal cables with a maximum nominal voltage rating of 300 V and a minimum temperature rating of 60 ºC for use in buildings and other structures in dry or damp locations in accordance with the Rules of Sections 16 and 32 of the Canadian Electrical Code, Part I. 1.2 Because other CSA Standards specify…

1.1 This Standard provides the requirements for the certification of companies engaged in the fusion welding of steel and the qualification of their personnel and welding procedures. Notes: (1) Certification may be mandatory or voluntary. (2) This Standard is not intended for applications governed by codes such as the American Society of Mechanical Engineers (ASME) Boiler and Pressure…

1 Scope 1.1 This Standard applies to (a) horizontal-axis and vertical-axis compact and standard household automatic or semi-automatic clothes washers; and (b) coin/card-operated residential-style clothes washers. 1.2 This Standard does not apply to wringer washers or twin tub washers/spinners. 1.3 This Standard does not provide a means for determining the energy consumption of a clothes…

1.1 Scope 1.1.1 This standard applies to automatically operating gas-fired central furnaces (see Part XI, Definitions), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for Direct Vent, Recreational Vehicle, Outdoor, and Manufactured (Mobile) Homes. These furnaces may include a cooling unit. All units shall be…

1. SCOPE 1.1 These requirements cover external corrosion protection systems on carbon steel underground storage tanks. The requirements are as follows: A Part 1 covers external corrosion protection using sacrificial anodes, electrical isolation and thin film dielectric coating (cathodic protected tank); B Part 2 covers external corrosion protection using dielectric fibre reinforced…

1. SCOPE 1.1 This Standard covers the design and construction of aboveground steel tanks of the non-pressure type, intended for installation inside or outside buildings and for the storage of combustible liquids intended to be used as heating fuel and/or generator fuel. NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or generator fuel. For tanks intended…

This National Standard of Canada is equivalent to International Standard ISO/TR 10017:2003 (second edition, 2003-05-15). 1 Scope This Technical Report provides guidance on the selection of appropriate statistical techniques that may be useful to an organization in developing, implementing, maintaining and improving a quality management system in compliance with ISO 9001. This is done by…

ISO 10303-522:2003 specifies the interpretation of the integrated resources to satisfy requirements for machining feature use across a range of application protocols. The product data is based on existing part designs that have their shapes represented by machining features. ISO 10303-522:2003 supports digital representation for computer integrated manufacturing. The following are within the…