Rechercher

1.1 Scope 1.1.1 This standard applies to automatically operating gas-fired central furnaces (see Part XI, Definitions), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for Direct Vent, Recreational Vehicle, Outdoor, and Manufactured (Mobile) Homes. These furnaces may include a cooling unit. All units shall be…

1. SCOPE 1.1 These requirements cover external corrosion protection systems on carbon steel underground storage tanks. The requirements are as follows: A Part 1 covers external corrosion protection using sacrificial anodes, electrical isolation and thin film dielectric coating (cathodic protected tank); B Part 2 covers external corrosion protection using dielectric fibre reinforced…

1. SCOPE 1.1 This Standard covers the design and construction of aboveground steel tanks of the non-pressure type, intended for installation inside or outside buildings and for the storage of combustible liquids intended to be used as heating fuel and/or generator fuel. NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or generator fuel. For tanks intended…

This National Standard of Canada is equivalent to International Standard ISO/TR 10017:2003 (second edition, 2003-05-15). 1 Scope This Technical Report provides guidance on the selection of appropriate statistical techniques that may be useful to an organization in developing, implementing, maintaining and improving a quality management system in compliance with ISO 9001. This is done by…

ISO 10303-522:2003 specifies the interpretation of the integrated resources to satisfy requirements for machining feature use across a range of application protocols. The product data is based on existing part designs that have their shapes represented by machining features. ISO 10303-522:2003 supports digital representation for computer integrated manufacturing. The following are within the…

IEC 60728-7-1:2003 specifies requirements for The Hybrid Fibre Coax (HFC) Outside Plant (OSP) Physical (PHY) Layer Specification and is part of the series of specifications developed by the Hybrid Management Sub-Layer (HMS) subcommittee under the SCTE. It describes the PHY layer requirements that must be implemented by all Type 2 and Type 3 compliant OSP HMS transponders on the HFC plant and the…

IEC 60728-7-1:2003 specifies requirements for The Hybrid Fibre Coax (HFC) Outside Plant (OSP) Physical (PHY) Layer Specification and is part of the series of specifications developed by the Hybrid Management Sub-Layer (HMS) subcommittee under the SCTE. It describes the PHY layer requirements that must be implemented by all Type 2 and Type 3 compliant OSP HMS transponders on the HFC plant and the…

This National Standard of Canada is based on International Standard ISO 10535:1998, first edition, 1998-10-15, (with Canadian deviations) 1 Scope This European standard specifies requirements and test methods only for hoists and body support units intended for the transfer of disabled persons as classified in EN ISO 9999:1998: 12 36 03 Wheeled hoists with sling seats 12 36 06 Wheeled hoists…

This National Standard of Canada is equivalent to International Standard ISO 23328-2:2002 (first edition, 2002-10-15). 1 Scope This part of ISO 23328 specifies requirements for non-filtration aspects of breathing system filters (BSF) intended for anaesthetic and respiratory use, and addresses connection ports, leakage, resistance to flow, packaging, marking and information supplied. The test…

Z241.0-03 Definitions and General Safety Requirements for Park Model Trailers 1. Scope This Standard provides the definition of the term "park model trailer" as used in the CSA Z241 Series. It also gives general safety requirements that apply to the other Standards in this Series. Z241.1-03 Vehicular Requirements for Park Model Trailers 1. Scope 1.1 Requirement Specification…