1. OBJET
1.1 La présente norme s’applique à deux grades de propane utilisés uniquement comme carburant. Ces grades sont
essentiellement des composés en C3.
1.1.1 Le propane de grade 1 est destiné aux moteurs à combustion interne et peut servir de carburant dans des
applications industrielles et commerciales de nature générale. Il conserve un indice d’octane minimal en limitant
la…
Information technology - Universal Coded Character Set (UCS) - Amendment 1: Linear A, Palmyrene, Man...
ISO/IEC 10646:2012 specifies the Universal Character Set (UCS). It is applicable to the representation, transmission, interchange, processing, storage, input and presentation of the written form of the languages of the world as well as additional symbols. It covers 110 181 characters from the world's scripts.
ISO/IEC 10646:2012:
specifies the architecture of ISO/IEC 10646.
defines…
Soils – Determination of Minimum and Maximum Densities and Density Index of Cohesionless Soils –Vibr...
SCOPE
This standard applies to free draining cohesionless soils containing up to 10 % in weight of particles
able to pass through a 80-mm sieve and which contain not more than 10 % in weight of particles
retained on a 80-mm sieve.
NOTE — When the soil contains from 10 % to 30 % in weight of particles retained on the 80-mm sieve,
this standard may be applied using a correction factor…
Scope
1.1 General
1.1.1
This Standard provides requirements for the commissioning of health care facilities and all related building systems. It applies to new facilities, and renovations and additions to existing facilities.
This Standard is based on CSA Z320, Building commissioning, with additions as appropriate to address the special requirements for health care facility commissioning.
1…
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
IEC 60243-1:2013 provides test methods for the determination of short-time electric strength of solid insulating materials at power frequencies between 48 Hz and 62 Hz. This standard does not cover the testing of liquids and gases, although these are specified and used as impregnates or surrounding media for the solid insulating materials being tested. NOTE: Methods for the determination of…
Practice for calibration of routine dosimetry systems for radiation processing
ISO/ASTM 51261:2013 specifies the requirements for calibrating routine dosimetry systems for use in radiation processing, including establishing measurement traceability and estimating uncertainty in the measured dose using the calibrated dosimetry system.
NOTE 1 — Regulations or other directives exist in many countries that govern certain radiation processing applications such as…
Residential Fire and Life Safety Warning Systems: Installation, Inspection, Testing and Maintenance
1.1 This Standard sets forth the minimum requirements for the design, installation, inspection, testing and
maintenance of residential fire warning systems for use within dwelling units and care occupancies not
requiring fire alarm systems conforming to CAN/ULC-S524, Installation of Fire Alarm Systems. (See
Appendix A, Explanatory Notes, Clause A1.1).
NOTE: This Standard is intended to apply…
Fire tests – Full-scale room test for surface products
1. Scope
[Revise the 3rd paragraph to read:]
“A standard ignition source is specified.
NOTE: The ignition source used in CAN/ULC-S138, Standard Method of Test for Fire
Growth of Insulated Building Panels in a Full-Scale Room Configuration, is similar to the
ignition source specified in Annex A2.1.”
[Add a Note to the 4th paragraph to read:]
“NOTE: Fire testing of insulated building panels…
Performance testing of nuclear air-cleaning systems at nuclear facilities
Scope
1.1 Facilities
1.1.1 Types of facilities
1.1.1.1 Class I nuclear facilities
This Standard addresses the design and execution of a nuclear air- cleaning system testing program for Class I nuclear facilities. These facilities include
a) nuclear reactors;
b) uranium fuel fabrication plants;
c) isotope processing facilities;
d) particle accelerators with a beam energy equal to or…
Scope
1.1 General
This Standard specifies requirements for the safe use, disinfection, testing, and maintenance of monitoring systems for hemodialysis. It is intended for use by dialysis providers, including health care workers and professionals who perform technical and operational functions associated with hemodialysis. This Standard applies to
a) quality management;
b) monitoring of fluid…
