Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish ...
IEC 60317-33:2015 specifies the requirements of polyester glass fibre wound, impregnated, bare or enamelled rectangular copper winding wire, temperature index 200. The range of nominal conductor dimensions covered by this standard is:<br />
- width: min 2,0 mm max 16,0 mm;<br />
- thickness: min 0,80 mm max 5,60 mm. The specified combinations of width and thickness as well as the…
Intelligent transport systems — Cooperative ITS — Part 2: Framework overview
ISO 17427-2:2015 characterizes and provides an overview of the framework which enables collaborative and cooperative ITS to operate and defines the characteristics and components of a Cooperative-ITS (C-ITS), its context and relevance for ITS service provision, and provides references to International Standards deliverables where specific aspects of C-ITS are defined. The objective of this…
Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish ...
IEC 60317-31:2015 specifies the requirements of glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper winding wire, temperature index 180. The range of nominal conductor dimensions covered by this standard is:
- width: min.2,0 mm max.16,0 mm;
- thickness: min.0,80 mm max. 5,60 mm. The specified combinations of width and thickness as well as the specified width/…
Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish ...
IEC 60317-32:2015 specifies the requirements of glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper winding wire, temperature index 155. The range of nominal conductor dimensions covered by this standard is:
- width: min 2,0 mm max 16,0 mm;
- thickness: min 0,80 mm max 5,60 mm. The specified combinations of width and thickness as well as the specified width/…
Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish ...
IEC 60317-33:2015 specifies the requirements of polyester glass fibre wound, impregnated, bare or enamelled rectangular copper winding wire, temperature index 200. The range of nominal conductor dimensions covered by this standard is:
- width: min 2,0 mm max 16,0 mm;
- thickness: min 0,80 mm max 5,60 mm. The specified combinations of width and thickness as well as the specified width/thickness…
Hydrometry — Fishpasses at flow measurement structures
ISO 29606:2015 specifies requirements for the integration of fishpasses with flow measurement structures. It identifies those fishpasses which have satisfactory hydrometric calibration data and gives methods for computing combined flows and uncertainties.
NOTE Flow measurement structures and fishpasses have inherently different hydraulic performance criteria. Flow measurement structures…
Public transport — Interoperable fare management system — Part 1: Architecture
ISO 24014-1:2015 provides the basis for the development of multi-operator/multi-service Interoperable public surface (including subways) transport Fare Management Systems (IFMSs) on a national and international level.
ISO 24014-1:2015 is applicable to bodies in public transport and related services which agree that their systems need to interoperate.
While ISO 24014-1:2015 does not imply that…
Household and similar electrical appliances - Safety - Part 2-75:Particular requirements for commerc...
IEC 60335-2-75:2012+A1:2015 deals with the safety of electric commercial dispensing appliances and vending machines for preparation or delivery of food, drinks and consumer products, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are bulk tea or coffee brewing machines,…
Aéronefs — Exigences d'interface des ferrures d'attache de barre de tractage — Partie 2: A...
ISO 8267-2:2015 spécifie les exigences d'interface pour les attaches de barre de tractage sur le train avant (lorsque les opérations de tractage sont effectuées à partir du train avant) des trains d'atterrissage conventionnels tricycles des aéronefs civils de transport commercial de passagers et de fret.
Son but est d'aboutir à une normalisation de l'interface des ferrures d…
Aircraft — Tow bar attachment fittings interface requirements — Part 2: Regional aircraft
ISO 8267-2:2015 specifies the interface requirements for tow bar attachment fittings on the nose gear (when towing operations are performed from the nose gear) of conventional tricycle type landing gears of commercial civil transport aircraft.
Its purpose is to achieve tow bar attachment fittings interface standardization by aircraft mass category (which determines tow bar forces) in order to…
