Rechercher

This National Standard of Canada is equivalent to International Standard ISO 19904-1:2006. 1 Scope This part of ISO 19904 provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: - production; - storage and/or offloading; - drilling and production; -…

This National Standard of Canada is joint with UL 60745-2-5; and both are based on International Standard IEC 60745-2-5. 1 Scope This clause of Part 1 is applicable, except as follows: Addition: This standard applies to all types of circular saws. Circular saws hereinafter will be referred to as saws. This standard does not apply to saws used with abrasive wheels.

This National Standard of Canada is joint with UL 60745-1; and both are based on International Standard IEC 60745-1. 1 Scope This part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools. So far as is…

This National Standard of Canada is equivalent to International Standard ISO 14971:2007. 1 Scope This International Standard specifies a process for a manufacturer to identify the hazards associated with medical devices, including in vitro diagnostic (IVD) medical devices, to estimate and evaluate the associated risks, to control these risks, and to monitor the effectiveness of the controls…

This National Standard of Canada is equivalent to International Standard ISO 500-1:2004. 1 Scope This part of ISO 500 gives general specifications, including speeds, safety requirements, the dimensions for the master shield and clearance zones for rear-mounted power take-offs (PTOs) of types 1, 2 and 3 on agricultural tractors with a track setting of more than 1 150 mm (those with a track…

This National Standard of Canada is equivalent to International Standard ISO 500-2:2004. 1 Scope This part of ISO 500 specifies the dimensions of the master shield and clearance zones for rear-mounted power take-offs (PTO) of types 1 and 2 on narrow-track (track width 1 150 mm or less) agricultural tractors. *********************************** ISO 500-2:2004 endorsed standard replaces this…

This National Standard of Canada is equivalent to International Standard ISO 500-3:2004. 1 Scope This part of ISO 500 specifies manufacturing requirements for, and the location of, rear-mounted power takeoffs (PTOs) of types 1, 2 and 3 on agricultural tractors. ************************************************************ ISO 500-3:2004 endorsed standard replaces this standard.

This National Standard of Canada is equivalent to International Standard ISO 5673-1:2005. 1 Scope This part of ISO 5673 specifies the power take-off (PTO) drive shafts of a tractor or self-propelled machine used in agriculture and the power-input connection (PIC) of its implement, establishing a method for determining PTO static and dynamic torsional strength while giving manufacturing and…

This National Standard of Canada is equivalent to International Standard ISO 5673-2:2005. 1 Scope This part of ISO 5673 gives the forms and applications of power take-off (PTO) drive shafts for tractors and self-propelled machines used in agriculture, and specifies the dimensions for, and clearance zone around, the implement power-input connection (PIC) for a variety of attachments. Its…

This National Standard of Canada is equivalent to International Standard ISO 6489-3:2004. 1 Scope This part of ISO 6489 specifies the dimensional requirements and location for category 0, 1, 2, 3, 4 and 5 drawbars mounted on the rear of agricultural tractors. ********************************************************************** Endorsed standard ISO 6489-3:2004 replaces this standard