Rechercher

This National Standard of Canada is equivalent to International Standard ISO 500-1:2004. 1 Scope This part of ISO 500 gives general specifications, including speeds, safety requirements, the dimensions for the master shield and clearance zones for rear-mounted power take-offs (PTOs) of types 1, 2 and 3 on agricultural tractors with a track setting of more than 1 150 mm (those with a track…

This National Standard of Canada is equivalent to International Standard ISO 500-2:2004. 1 Scope This part of ISO 500 specifies the dimensions of the master shield and clearance zones for rear-mounted power take-offs (PTO) of types 1 and 2 on narrow-track (track width 1 150 mm or less) agricultural tractors. *********************************** ISO 500-2:2004 endorsed standard replaces this…

This National Standard of Canada is equivalent to International Standard ISO 500-3:2004. 1 Scope This part of ISO 500 specifies manufacturing requirements for, and the location of, rear-mounted power takeoffs (PTOs) of types 1, 2 and 3 on agricultural tractors. ************************************************************ ISO 500-3:2004 endorsed standard replaces this standard.

This National Standard of Canada is equivalent to International Standard ISO 5673-1:2005. 1 Scope This part of ISO 5673 specifies the power take-off (PTO) drive shafts of a tractor or self-propelled machine used in agriculture and the power-input connection (PIC) of its implement, establishing a method for determining PTO static and dynamic torsional strength while giving manufacturing and…

This National Standard of Canada is equivalent to International Standard ISO 5673-2:2005. 1 Scope This part of ISO 5673 gives the forms and applications of power take-off (PTO) drive shafts for tractors and self-propelled machines used in agriculture, and specifies the dimensions for, and clearance zone around, the implement power-input connection (PIC) for a variety of attachments. Its…

This National Standard of Canada is equivalent to International Standard ISO 6489-3:2004. 1 Scope This part of ISO 6489 specifies the dimensional requirements and location for category 0, 1, 2, 3, 4 and 5 drawbars mounted on the rear of agricultural tractors. ********************************************************************** Endorsed standard ISO 6489-3:2004 replaces this standard

1.1 Scope 1.1.1 This standard applies to newly produced gas food service equipment providing coverage for ranges and unit broilers, baking and roasting ovens, counter appliances, deep fat fryers, kettles, steam cookers, steam generators, (see Part IV, Definitions) hereinafter referred to as either (1) "appliances", constructed entirely of new, unused parts and materials for use in food…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60079-1:2003. 1 Scope This part of IEC 60079 contains specific requirements for the construction and testing of electrical apparatus with the type of protection flameproof enclosure "d", intended for use in explosive gas atmospheres.

This National Standard of Canada is based on International Standard CEI/IEC 60079-0:2004. 1 Scope This part of IEC 60079 specifies the general requirements for construction, testing and marking of electrical apparatus and Ex components intended for use in explosive gas atmospheres. Unless modified by one of the parts in the IEC 60079 series, electrical apparatus complying with this…

This National Standard of Canada is based on International Standard ISO 7376:2003. 1 Scope This International Standard specifies general requirements for laryngoscopes and critical dimensions for the handle and lamp of hook-on type laryngoscopes. It is applicable only to instruments with an electrical power source for illuminating the larynx, since electrical safety requirements may be more…