Rechercher

1.1 Cette norme s’adresse aux fabricants et acheteurs de machines vendues ou importées au Canada ou exportées à l’étranger. Elle s’adresse également aux organismes de réglementation, aux acousticiens et à tous les intéressés. 1.2 Cette norme a pour but de fournir : a) un guide quant aux étapes à suivre pour produire et vérifier une déclaration des valeurs d’émission sonore relative aux…

This is the first edition of CAN/CSA-IEC 62366-1, Medical devices — Part 1: Application of usability engineering to medical devices, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 62366-1 (first edition, 2015-02). It replaces CAN/CSA-IEC 62366:14 (adopted IEC 62366:2007). For brevity, this Standard will be referred…

This is the fourth edition of CAN/CSA-Z8836, Suction catheters for use in the respiratory tract, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 8836 (fourth edition, 2014-10-15). It supersedes the previous edition published in 2011 as CAN/CSA-Z8836 (adopted ISO 8836:2007). For brevity, this Standard will…

This is the first edition of CAN/CSA-Z17510, Medical devices — Sleep apnoea breathing therapy — Masks and application accessories, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 17510 (first edition, 2015-08-01). It replaces CAN/CSA-Z17510-2-10 (adopted ISO 17510-2:2007). For brevity, this Standard will be…

1.1 This National Standard of Canada1 provides additional information to CAN/CGSB-32.310, Organic production systems — General principles and management standards, in the form of permitted substances to be used as annotated in accordance with the scope of the table in which they are listed. Use of a listed substance in a manner inconsistent with the scope of the table in which it appears is…

1.1 These requirements apply to Factory-Built Unvented Decorative Appliances that are intended to be fixed/non-movable and that use ethyl alcohol (ethanol) and isopropyl alcohol (isopropanol) in liquid or gel form as the fuel. These appliances are intended to be decorative in nature and limited to a maximum output of 3 kW (10,000 BTU/hour). Appliances that use fuel oils, kerosene, gasoline,…

1.1 This Part applies to fuses for photovoltaic (PV) systems rated up to 1500 Vdc. 1.2 Fuses for photovoltaic (PV) systems are intended to be used for the protection of photovoltaic strings or arrays and their associated wiring to provide protection against overloads or short circuits within the marked electrical ratings in accordance with the Canadian Electrical Code (CSA C22.1 Canadian…

1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico’s Electrical Installations, NOM-001-SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2, 5, 12, 12K,…

1.1 General This Standard provides the requirements for materials and methods of construction for (a) cast-in-place concrete and concrete precast in the field; and (b) residential concrete used in the construction of buildings conforming to Part 9 of the National Building Code of Canada (NBCC). 1.2 This Standard does not specify the following: (a) requirements for the design of concrete…

1.1 This Standard applies to all types of laboratory fume hoods, except for ductless fume hoods. Note: Ductless fume hoods should not be considered acceptable substitutes for ducted fume hoods. Some jurisdictions prohibit use of ductless fume hoods with certain chemicals. For these reasons, ductless fume hoods have not been included in this Standard. 1.2 This Standard specifies a) safety…