Rechercher

1 Scope This document specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations. 1DV.1 D2 Modify Clause 1 by replacing the first paragraph with the following: This Standard specifies requirements for metallic, non-metallic, and composite cable ties and their…

1 Scope 1.1 These requirements cover flexible metallic hose supplied with fittings on each end that facilitate connection without twisting the hose. They have a corrugated metal core or a nonmetallic inner core which are covered with a stainless steel braid. They have a nominal inside diameter of not more than 4 in (101 mm) intended for use in piping systems carrying compressed gases, such as…

1 Domaine d’application 1.1 Ces exigences couvrent les tuyaux flexibles métalliques fournis avec deux raccords, un à chaque extrémité, qui facilitent le raccordement sans qu’il faille tordre le tuyau. Les tuyaux sont dotés d’un centre en métal ondulé ou d’un centre intérieur non métallique recouvert d’une tresse en acier inoxydable. Leur diamètre intérieur nominal ne dépasse pas 4 po (101 mm…

1 Scope 1.1 General This Standard pertains to the characterization of radioactive waste and irradiated fuel. This Standard a) specifies the overall requirements for establishing and implementing a waste characterization strategy, program, and plan; b) specifies methodologies for the sampling and characterization of radioactive waste and irradiated fuel; c) provides guidance for the timing…

1 Scope 1.1 This Standard provides requirements and guidance on the structural design of new wastewater treatment plants, including buildings and liquid-containing tanks, from the point effluent enters the plant to the point of its discharge. 1.2 This Standard is written in support of the design process provided by the National Building Code of Canada, but includes additional requirements…

1 Scope 1.1 This Standard applies to automatically operating gas-fired central furnaces (see Clause 3), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for direct vent, recreational vehicle, outdoor, and manufactured (mobile) homes. These furnaces can include a cooling unit. All units are to be constructed…

© CGSB 2021 — All rights reserved 1 CAN/CGSB-207.1-2021 Control of evaporative emissions from portable fuel containers 1 Scope This National Standard of Canada applies to Portable Fuel Container (PFC) systems, and components sold separately, with a rated capacity between 1 L and 32 L that are designed, used, sold, advertised, or offered for sale for receiving, transporting, storing, and…

1 Scope This document gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines, hereinafter referred to as “machines”, designed to cut wood and materials with similar physical characteristics to wood. NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085-1:2017, 3.4 and 3.5. It deals with all…

1 Scope This document gives the safety requirements and measures for stationary calibrating and sanding machines, with an integrated feed and one or more sanding belt units positioned above and/or below the work piece level, with manual or automatic loading and/or unloading, hereinafter referred to as “machines”. It deals with all significant hazards, hazardous situations and events as listed…

1 Scope 1.1 This Standard applies to luminaires for use in non-hazardous locations and that are intended for installation on branch circuits of 600 V nominal or less between conductors in accordance with the Canadian Electrical Code, Part I (CEC), CSA C22.1, with the U. S. National Electrical Code (NEC), ANSI/NFPA 70, and with the Mexican National Electrical Code, NOM-001-SEDE. 1.2 This…