Rechercher

1 Scope 1.1 Object This Standard provides Canadian monitoring network operator requirements and recommendations for selecting sites for automated, surface-based, hydrometeorological monitoring stations, and broad guidance for installing and maintaining commonly used automated hydrometeorological instrumentation. This Standard has two main technical sections: a) Clause 4, on station…

IEC TS 63222-2:2023 defines technical requirements for designing a power quality monitoring system for public power supply networks. It is applicable for LV, MV and HV public power supply networks. The design procedure of a power quality monitoring system (PQMS) generally includes the following four steps: • Step 1: purpose and application analysis: Analyse power quality monitoring (PQM) demand…

This document specifies the requirements for personal contamination monitoring and dose assessment following wounds involving radioactive materials. It includes requirements for the direct monitoring at the wound site, monitoring of uptake of radionuclides into the body and assessment of local and systemic doses following the wound event. It does not address: — details of monitoring and…

This standard applies to geotechnical site investigations performed in permafrost zones to provide essential information for the design of: ? foundations for all types of buildings; ? rehabilitation plans for existing building foundations. It also applies to the measuring of site-specific conditions in the process of performing geotechnical site investigations. It does not apply to post-…

Specifies conditions and criteria for the automated monitoring of the mass concentration of particulate matter in stationary source gas streams, including performance characteristics and test procedures. Provides the field evaluation test program and its application to automated monitoring systems. Applicable only on a site-specific basis by direct correlation with the manual testing method in…

1. Scope 1.1 At the onset of an accident, certain protective actions (e.g., reactor trip, emergency core cooling actuation, containment isolation) are designed to be performed automatically. Specific CSA Standards cover the systems that perform these actions. ,, However, the operator has an increasing role to play as time progresses in managing the outcome of the event. Instrumentation is…

IEC 60988:2009 is applicable to on-site systems used for continuous monitoring of structure-borne sound measured at the reactor coolant pressure boundary of light water reactors for the purpose of detecting loose parts. The main technical changes with regard to the previous edition are as follows: - to bring the contents up to date with technology change in some areas and to reconsider and…

1.1 This Standard provides requirements for the design and qualification of components for the monitoring and display of nuclear power plants (NPP) and irradiated fuel bay safety functions in the event of a design basis accident (DBA) or a design extension condition (DEC). Note: The requirements for a DBA and those for a DEC might differ. Where requirements differ for a DBA and a DEC, the…

IEC 62705:2014 applies to radiation monitoring system (RMS) installed in the nuclear power plants (NPPs). This standard gives requirements for the lifecycle management of RMSs and gives guidance on the application of existing IEC standards covering the design and qualification of systems and equipment. This standard may be applicable to other nuclear facilities (e.g. nuclear fuel storage and…

This International Standard establishes an approach for sampling and empirical measurement of soft-bottom impacts from marine finfish net pen farms, and gives examples of detailed procedures for how environmental impacts from finfish net pen farm sites can be monitored in the field, including guidelines for quality assurance of sampling protocols and safety. The emphasis of the environmental…