Rechercher

IEC 60060-2:2025 is applicable to complete measuring systems and to their components, used for the measurement of high voltages during laboratory and factory tests with direct voltage, alternating voltage and lightning and switching impulse voltages and combined and composite voltages as specified in IEC 60060-1. For measurements during on-site tests, see IEC 60060-3. The limits on uncertainties…

IEC 61000-4-2: 2025 relates to the immunity requirements and test methods for electrical and electronic equipment subjected to static electricity discharges from operators directly and from personnel to adjacent objects. It additionally specifies ranges of test levels which relate to different environmental, and installation conditions and establishes test procedures. The objective of this…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of sealed (hermetic and semi-hermetic type) MOTORCOMPRESSORS, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to MOTOR-COMPRESSORS tested…

This document specifies an amperometric method to determine the content of damaged starch in flour. It is applicable to all flour samples from the industrial or laboratory milling of wheat (Triticum aestivum L.). NOTE 1        Wheat can be milled in the laboratory in accordance with the methods described in ISO 27971[9] or in the BIPEA guidance document BY.102.D[10]. NOTE 2        In the absence…

1 Scope and object IEC 61010-1:2010, Clause 1 and IEC 61010-1:2010/AMD1:2016, Clause 1 apply except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This document specifies safety requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring MAINS. Hand-held multimeters are multi-range…

1 Scope and object IEC 61010-1:2010, Clause 1 and IEC 61010-1:2010/AMD1:2016, Clause 1 apply except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This document specifies safety requirements to equipment for measuring insulation resistance and to equipment for testing electric strength which have an output voltage exceeding 50 V a.c. or 120 V d.…

1 Scope and object IEC 61010-1:2010, Clause 1 and IEC 61010-1:2010/AMD1:2016, Clause 1 apply except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This document specifies safety requirements for HAND-HELD and hand-manipulated current sensors intended for measuring, detecting or injecting current, or indicating current waveforms on circuits…

This document provides an overview of the validation of air quality measurement methods in the standardization process. This document deals with robustness testing and interlaboratory testing as the two main steps of partial and full validation. It applies to the different inter-related elements of air quality measurement methods, covering e.g. sampling, sample preparation, storage and…

1 Scope 1.1 Safety guidance for use of energy-based medical and surgical devices This Standard presents guidance to ensure the safety of persons at risk in locations where energy-based medical and surgical devices are used. This includes but is not limited to guidance on purchasing, education, training, installation, use, servicing, maintenance, engineering and administrative controls, and…

IEC 60335-2-34:2024 EXV contains both the international standard and its extended version (EXV). This extended version of the official IEC Standard is available in English only and provides the user with a comprehensive content of the Standard. IEC 60335-2-34:2024 EXV includes the content of the references made to IEC 60335-1:2020. IEC 60335-2-34:2024 deals with the safety of sealed (hermetic…