This document gives general information on the key steps for the preparation of candidate matrix reference materials (RMs) including the material specification, sourcing and selection of bulk material, and the processing of the material, which are important steps for the production of matrix RMs.
The document provides information on the preparation of candidate RMs for laboratory staff who…
Synchronous belt drives — Automotive belts — Determination of physical properties
This document specifies test methods for determining the physical properties of synchronous belts used in driving engine parts, such as camshafts, fuel injection pumps, balancing shafts. These test methods are intended to provide a means of characterizing synchronous belt properties for belts which are evaluated and qualified by dynamic laboratory and field testing.
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-0...
1 Scope and object
IEC 61010-1:2010, Clause 1 and IEC 61010-1:2010/AMD1:2016, Clause 1 apply except as
follows:
1.1.1 Equipment included in scope
Replace the existing text with the following:
This document specifies safety requirements for hand-held multimeters and other meters for
domestic and professional use, capable of measuring MAINS.
Hand-held multimeters are multi-range…
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-0...
1 Scope and object
IEC 61010-1:2010, Clause 1 and IEC 61010-1:2010/AMD1:2016, Clause 1 apply except as
follows:
1.1.1 Equipment included in scope
Replace the existing text with the following:
This document specifies safety requirements to equipment for measuring insulation resistance
and to equipment for testing electric strength which have an output voltage exceeding 50 V a.c.
or 120 V d.…
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-0...
1 Scope and object
IEC 61010-1:2010, Clause 1 and IEC 61010-1:2010/AMD1:2016, Clause 1 apply except as
follows:
1.1.1 Equipment included in scope
Replace the existing text with the following:
This document specifies safety requirements for HAND-HELD and hand-manipulated current
sensors intended for measuring, detecting or injecting current, or indicating current waveforms
on circuits…
Air quality — Validation of air quality measurement methods in the standardization process
This document provides an overview of the validation of air quality measurement methods in the standardization process.
This document deals with robustness testing and interlaboratory testing as the two main steps of partial and full validation. It applies to the different inter-related elements of air quality measurement methods, covering e.g. sampling, sample preparation, storage and…
Renewable energy off-grid systems – Part 9-5: Integrated systems – Laboratory evaluation of stand-al...
IEC TS 62257-9-5:2024 provides support and strategies for institutions involved in rural electrification projects. It documents technical approaches for designing, building, testing, and maintaining off-grid renewable energy and hybrid systems with AC nominal voltage below 500 V, DC nominal voltage below 750 V and nominal power below 100 kVA.
The purpose of this document is to specify laboratory…
Health informatics — Guidelines for exchanging data generated by portable polymerase chain reaction ...
This document identifies specialized use cases related to the information exchange between clinical laboratories and portable polymerase chain reaction (PCR) devices designed for real-time testing to diagnose infectious diseases.
This document introduces the portable PCR devices for point-of-care testing (POCT). Characteristic and differentiated use cases of these devices are listed separately…
Textile floor coverings — Water impermeability test
This document specifies a laboratory test method for determining the water impermeability of textile floor coverings.
This document does not apply to the characterization of a wall-to-wall installation of textile floor covering tiles.