Rechercher

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI T1.408-1990. 1.1 General It establishes performance and technical criteria for interfacing and interconnecting the various functional groups shown in figure 1. Compliance with this standard is intended to ensure compatibility at the interface points /a and /b (figure 1) and should not…

1.1 This Standard covers structural quality steel plates, shapes, hollow sections, sheet piling, and bars for general construction and engineering purposes. 1.2 A number of strength levels are available under this Standard and are designated by the minimum yield strength in megapascals. The grades, types, and strength levels normally available are shown in Table 1. Charpy V-Notch…

1. Scope 1.1 These requirements apply to drive machine controllers, logic controllers, and operating devices accessory thereto, for starting, stopping, regulating, controlling, or protecting electric motors, generators, or other equipment, for elevators, escalators, moving walks, dumbwaiters, and elevating devices for the handicapped (wheelchair and stairway lifts). 1.2 The electrical…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI T1.612-1990. 1 Scope This standard covers the connection between the Integrated Services Digital Network (ISDN) and terminals with interfaces for modems conforming to current standards (e.g. ANSI/EIA 232-D-1986), operating in accordance with demand or semi-permanent circuit mode ISDN…

1.1 Applies to information processing equipment and associated electronic units and to business equipment intended to be connected to supply circuits with a maximum nominal voltage of 600 V and designed to be operated under conditions of normal use in nonhazardous locations when installed in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard applies to equipment that…

Loose-leaf booklet containing standard outlines and lead connections of surface acoustic wave (SAW) resonators. Six sheets are included and supplements will be issued as new outlines are developed.

Specifies: basic dimensions, requirements for alternative designs, dimensions and positions for the holes and pins for the outlet connections. This second edition cancels and replaces the first edition (1983).

1. Domaine d'application 1.1 La présente norme s'applique aux fiches, aux prises et aux connecteurs pour réseaux de télécommunication destinés au raccordement électrique: (a) des cordons de transmission fixes; (b) des cordons de transmission amovibles; ou (c) de tout matériel connecté à une section à découvert d'un système de télécommunication ou à un réseau de…

1. Scope 1.1 This Standard applies to modular wiring systems combined with the office furniture in which they are intended to be used. 1.2 This Standard applies to equipment intended to be connected to one or more supply circuits at a nominal system voltage of 120 V to ground, and a maximum rating of 20 A per circuit, for use in nonhazardous locations, in accordance with the Rules of the…