Rechercher

1 SCOPE 1.1 This Standard contains requirements for 65 mm forged quick connect couplings and adapters of the external lug design for use in the forestry service. NOTE: Quick connect coupling and adapter sizes stated refer to the nominal diameter of the forestry hose. 1.2 The couplings and adapters are intended for use with forestry fire hose of the 65 mm standard sizes.

1 SCOPE 1.1 This Standard contains requirements for 25 and 38 mm forged quick connect couplings and adapters of the external lug design for use in the forestry service. NOTE 1: Quick connect coupling and adapter sizes stated refer to the nominal diameter of the forestry hose. NOTE 2: The requirements for non forged External Lug Quick Connect Couplings and Adapters for Forestry Fire Hose are…

Scope 1.1 This Standard specifies safety requirements for pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems in health care facilities, both public and private. It applies to all facilities providing health care services, regardless of type, size, location, or range of services, including, but not limited to (a) acute care hospitals; (b) in-…

Scope 1.1 This Standard applies to electrically operated, general-purpose valves* and safety valves* that are intended to be used in ordinary locations in accordance with the Canadian Electrical Code, Part I, for the control of fluids (e.g., air, gases, oils, refrigerants, steam, water, etc.), and rated 600 V and less. * For convenience, the shorter term "valve" is used where the…

1 Scope [Replace this clause with the following] 1.1 This Standard specifies general and safety requirements for (a) light-emitting diode (LED) modules without integral controlgear for operation under constant voltage, constant current, or constant power; and (b) self-ballasted LED modules with integral controlgear for use on dc supplies up to 250 V or ac supplies up to 347 V. 1.2 This…

1 Scope [Replace this clause with the following] 1.1 This Standard specifies general and safety requirements for (a) light-emitting diode (LED) modules without integral controlgear for operation under constant voltage, constant current, or constant power; and (b) self-ballasted LED modules with integral controlgear for use on dc supplies up to 250 V or ac supplies up to 347 V. 1.2 This…

1 SCOPE 1.1 This Standard contains requirements for 25 and 38 mm quick connect couplings and adapters of the external lug design for use in the forestry service. NOTE 1: Quick connect coupling and adapter sizes stated refer to the nominal diameter of the forestry hose. NOTE 2: The requirements for Forged External-Lug Quick Connect Couplings and Adapters for Forestry Fire Hose are contained…

Scope 1.1 This Standard applies to encapsulated isolating transformers for use as a circuit continuity device, intended to be installed in airport field lighting series circuits for use in nonhazardous locations in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard applies to transformers that consist of primary and secondary coils that are wound upon a core, the…

IEC 60358-3:2013 applies to AC or DC single-phase coupling capacitor, with rated voltage higher than 1 000 V, connected line to ground with the low voltage terminal either permanently earthed or connected to a tuning device for harmonic-filters applications. It replaces Clause 1 of IEC 60358-1:2012. Keywords: AC or DC single-phase coupling capacitor This publication is to be read in…

L'IEC 60358-3:2013 s'applique aux condensateurs de couplage monophasés à courant alternatif ou à courant continu, de tension assignée supérieure à 1 000 V, connectés entre la ligne et la terre, avec la borne basse tension connectée de manière permanente à la terre ou connectée à un dispositif d'accord pour des applications à filtres harmoniques. Il remplace l'Article 1 de la…