1. SCOPE
1.1 This Specification applies to complete flue-connected oil burning stoves
incorporating oil burners of the vapourizing-type.
1.2 The requirements given herein apply to circulating and radiant room
heaters, ranges, and combination ranges, as defined in this Specification.
Note: The following related appliances are covered by other CSA Standards:
(a) Mobile hone…
Connectors for frequencies below 3 MHz (Mc/s) - Part 1: General requirements and measuring methods
Deals with terminology, classification into groups, values of rated voltage and of rated current, type designation, type tests, standard conditions for testing, visual inspection, clearances and creepage distances, electrical tests, mechanical tests and climatic tests. This part has been replaced by IEC 512-7.
Rotary wafer switches (low current rating). Part 1: General requirements and measuring methods
Deals with terminology, classification into groups, electrical ratings, marking, IEC type designation, type tests, standard conditions for testing, visual inspection, dimensions, clearances and creepage distances, electrical tests, mechanical tests, climatic tests and endurance tests.
Toggler switches - Part 1: General requirements and measuring methods
Applies to lever switches for use in electronic and electromechanical equipment, including switches necessary to connect the supply mains. Switches covered by this standard have a maximum rated voltage not exceeding 500 V and a maximum rated current not exceeding 25 A (d.c. or a.c. r.m.s. values).
Establishes uniform specifications and type test requirements for lever switches also establish…
Small Solid Rivets (7-16 Inch Nominal Diameter and Smaller)
1. SCOPE
1.1 Scope. The standard types for small rivets covered by this Specification
are as follows: flat head, countersunk head, round head, pan head, truss head,
tinners', coopers' and belt rivets. All other types within the limits of
diameters given shall be considered specials.
Cranes — Proof of competence of steel structures — Part 1: General
ISO 20332-1:2008 sets forth general conditions, requirements, methods and parameter values for performing proof-of-competence determinations of the steel structures of cranes based upon the limit state method. It is intended to be used together with the loads and load combinations of the applicable parts of ISO 8686.
ISO 20332-1:2008 is general and covers cranes of all types. Other International…
Ships and marine technology — Marine combined connecting mooring line
This standard specifies classification, structure and symbol, design requirement, testing and inspection methods, marking of marine combined connecting mooring line (hereinafter referred to as combined line).
This standard applies to design, manufacture and inspection of combined line for tanker, combined line used in others types of ships can selected by reference.
Measurement procedures associated with the chain of custody in native tropical forest management are...
This International Standard establishes process to measure native vegetation that is being logged in native tropical areas following a management forest plan. Such process includes quantification and monitoring of the area explored to support the analysis of the chain of custody, helping to insure the legal origin of the logged material.
This International Standard proposes to establish…
Information security, cybersecurity and privacy protection — Evaluation criteria for IT security — P...
This document establishes the general concepts and principles of IT security evaluation and specifies the general model of evaluation given by various parts of the standard which in its entirety is meant to be used as the basis for evaluation of security properties of IT products.
This document provides an overview of all parts of the ISO/IEC 15408 series. It describes the various parts of the…
