Rechercher

1.1 This Standard applies to electric clothes dryers intended to be used in nonhazardous locations in accordance with the Canadian Electrical Code, Part 1 (CEC) and the (U.S.) National Electrical Code (NEC), on circuits having a nominal voltage not exceeding 600 V. 1.2 This Standard applies to both cord-connected and permanently connected machines. The appliances covered by this…

1.1 This Standard specifies maximum losses for distribution, power, and dry-type transformers of types similar to or as described in CSA Standards CAN/CSA-C2, CAN/CSA-C9, CAN/CSA-C22.2 No. 47, CAN/CSA-C88, CAN/CSA-C227.3, C227.4, and C301.1. The losses specified are for normal designs of transformer, as described in the relevant clauses, but in addition losses are specified for some…

Defines the electrical and mechanical parameters and the necessary characteristics of the VHS and the compact VHS video cassette system. The requirements relate to the 525 line-60 field and 625 line-50 field TV systems. Equipment manufactured according to this standard and tapes recorded following this standard, provide the necessary interchangeability of recorded video cassettes.

1.1 This Standard applies to electric clothes washing machines and extractors intended to be used in nonhazardous locations in accordance with the Canadian Electrical Code, Part 1 (CEC) and the (U.S.) National Electrical Code (NEC), on circuits having a nominal voltage not exceeding 600 V. 1.2 This Standard applies to both cord-connected and permanently connected machines. The…

This National Standard of Canada is equivalent to American national Standard ANSI/BHMA A156.21-1989. 1.1 This Standard establishes requirements for thresholds. Types are described with identifying numbers. Strength tests and fastening systems are included. 1.2 Test described or referenced in this Standard are performed under laboratory conditions. In actual use, results may vary…

This national Standard of Canada is equivalent to American national Standard ANSI/BHMA A156.14-1991. 1.1 This Standard establishes requirements for Sliding and Folding Door Hardware. Cycle tests, static load, static friction, kinetic friction and finish tests are included. Hardware for light to very heavy doors is covered including both residential and industrial applications. 1.2…

This International Standard specifies the physical and magnetic characteristics of a 3,81 mm wide magnetic tape cartridge to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals, the recorded format and the recording method, thereby allowing data interchange between drives by means of such magnetic tape cartridges. The format used is known as DATA/…

This International Standard specifies the physical and magnetic characteristics of a 3,81 mm wide magnetic tape cartridge to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals, the recorded format and the recording method, thereby allowing data interchange between drives by means of such magnetic tape cartridges. The format used is known as DATA/…

Lays down detailed specifications for the instrumentation and procedure to be used for secondary shock calibration of accelerometers. Applies to rectilinear accelerometers of the strain gauge, piezoresistive and piezoelectric types and to secondary standard accelerometers. Is applicable for a time range from 0,1 ms to 10 ms and a dynamic range from 100 m/s^2 to 10^5 m/s^2. The limits of…

Lays down detailed specifications for the instrumentation and procedure to be used for primary calibration of accelerometers using Earth's gravitation. Applies to rectilinear accelerometers with zero-frequency response, mainly of the strain gauge or piezoresistive type, to servopick-ups, and to primary standard and working pick-ups. Is applicable for ± local Earth's gravitation at 0 Hz…