Rechercher

1 Scope 1.1 This Standard specifies requirements for single- and multi-conductor insulated cables having metallic interlocked armour without an overall jacket (Type AC90 or ACG90) or with an overall jacket (Type ACWU90 or ACGWU90) that are intended for installation in accordance with CSA C22.1, Canadian Electrical Code, Part I, on systems having nominal voltages of 2000 V and less. ACG90 and…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for HAND-HELD and hand-manipulated current sensors described below. These current sensors are for measuring, detecting or injecting current, or indicating current waveforms on circuits…

1 Scope 1.1 This Standard provides guidance for the safe use of lasers in health care. It applies to all procedures in health care settings where health care lasers are used, including, but not limited to, the following: a) health care facilities; b) dental clinics, offices, and facilities; c) veterinary facilities; d) laboratories and other research facilities; e) physician offices…

IEC TS 62607-6-13:2020 establishes a standardized method to determine the chemical key control characteristic • oxygen functional group content on graphite oxide, graphene oxide, reduced graphene oxide and other types of functionalized graphene by • Boehm titration method. In this document, the measured functional groups are carboxyl groups (also in the form of their cyclic anhydrides),…

1 Scope 1.1 These minimum requirements cover the following types of anhydrous ammonia and liquefied petroleum gas (LP-Gas) valves that are used to control the flow of liquid and/or vapor into and out of containers, or in piping systems between containers, or between containers and utilization equipment, and are for use at temperatures within the range of -40 °C (-40 °F) to 55 °C (130 °F): a…

1.1 Les présentes exigences minimales couvrent les types suivants de soupapes pour ammoniac anhydre et de gaz de pétrole liquéfié (GPL) qui sont utilisées pour contrôler le débit de liquide et/ou de vapeur dans et hors des conteneurs, ou dans les systèmes de tuyauterie entre les conteneurs, ou entre les conteneurs et l’équipement d’utilisation, et sont destinées à être utilisées à des…

This document specifies two methods for the determination of the specific surface area of types and grades of carbon black for use in the rubber industry: — method A: automatic gas chromatography method (carrier gas method); — method B: automatic volumetric method. Somewhat different results might be obtained from the two methods. The degassing procedure differs between method A and…

IEC 62890:2020(E) establishes basic principles for Life-Cycle-Management of systems and components used for industrial-process measurement, control and automation. These principles are applicable to various industrial sectors. This standard provides definitions and reference models related to the life-cycle of a product type and the life time of a product instance, It defines a consistent set of…

1.1 These requirements cover submetering equipment and open and enclosed type current sensors intended for factory or field installation within the wiring space of enclosures for switches or overcurrent devices. Installation is in accordance with the National Electrical Code, ANSI/NFPA 70 and the Canadian Electrical Code (CE Code), CSA C22.1. These requirements also cover "Service…

IEC 62890:2020 establishes basic principles for Life-Cycle-Management of systems and components used for industrial-process measurement, control and automation. These principles are applicable to various industrial sectors. This standard provides definitions and reference models related to the life-cycle of a product type and the life time of a product instance, It defines a consistent set of…