Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-03...
1 Scope and object
This clause of Part 1 is applicable except as follows:
1.1.1 Equipment included in scope
Replace the existing text with the following:
This part of IEC 61010 specifies safety requirements for hand-held multimeters for domestic
and professional use, capable of measuring MAINS.
Hand-held multimeters are multi-range multifunction measuring instruments intended to
measure…
Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-03...
1 Scope and object
This clause of Part 1 is applicable except as follows:
1.1.1 Equipment included in scope
Replace the existing text with the following:
This part of IEC 61010 specifies safety requirements for HAND-HELD and hand-manipulated
current sensors described below.
These current sensors are for measuring, detecting or injecting current, or indicating current
waveforms on circuits…
1 Scope
1.1
This Standard provides guidance for the safe use of lasers in health care. It applies to all procedures in health care settings where health care lasers are used, including, but not limited to, the following:
a)
health care facilities;
b)
dental clinics, offices, and facilities;
c)
veterinary facilities;
d)
laboratories and other research facilities;
e)
physician offices…
Automation systems and integration — Quality information framework (QIF) — An integrated model for m...
This document describes the general content and structure of the entire QIF information model. It describes the highest level data structures of QIF, that are expanded in Clauses 6 through 12 using data dictionaries and XML schema files. All QIF XML schema files can be found at www.qifstandards.org.
This document also describes practices for forming QIF instance files, called "documents,…
1.2.1 This Standard is intended to cover specific materials or products that come into contact with:
drinking water, drinking water treatment chemicals, or both. The focus of the Standard is evaluation of
contaminants or impurities imparted indirectly to drinking water. The products and materials covered
include, but are not limited to, process media (e.g., carbon, sand), protective materials…
Wind energy generation systems - Part 27-1: Electrical simulation models - Generic models
IEC 61400-27-1:2020 defines standard electrical simulation models for wind turbines and wind power plants. The specified models are time domain positive sequence simulation models, intended to be used in power system and grid stability analyses. The models are applicable for dynamic simulations of short term stability in power systems. This document defines the generic terms and parameters for…
Wind energy generation systems - Part 27-1: Electrical simulation models - Generic models
IEC 61400-27-1:2020 defines standard electrical simulation models for wind turbines and wind power plants. The specified models are time domain positive sequence simulation models, intended to be used in power system and grid stability analyses. The models are applicable for dynamic simulations of short term stability in power systems. This document defines the generic terms and parameters for…
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment ...
IEC 61000-6-3:2020 is a generic EMC emission standard applicable only if no relevant dedicated product or product family EMC emission standard has been published. This part of IEC 61000 for emission requirements applies to electrical and electronic equipment intended for use at residential (see 3.1.14) locations. This part of IEC 61000 also applies to electrical and electronic equipment intended…
Electromagnetic compatibility (EMC) - Part 6-8: Generic standards - Emission standard for profession...
IEC 61000-6-8: 2020 is a generic EMC emission standard and is applicable only if no relevant dedicated product or product family EMC emission standard has been published. This part of IEC 61000 for emission requirements applies to electrical and electronic equipment intended for use in commercial and light-industrial (see 3.1.3) locations. This document applies to equipment that satisfy the…
Marking and Labeling Systems – Flag Labels, Flag Tags, Wrap-Around Labels and Related Products
1.1 These requirements cover flag labels, flag tags, wrap-around labels, and related products affixed to
an electrical flexible cord or fluid carrying hose. These products provide information, instructions, or
identification in the form of text or pictographs. When an adhesive is employed, it may be pressure
sensitive, heat activated, or solvent activated. These products are intended to be…