Rechercher

Applies to seamless steel tubes with circular section of non-alloy quality steel. These tubes are provided for general pressure purposes including transporting of pressurized fluids. There are standards and rules permitting the use of these tubes up to a temperature of 350 0C (see annex A). The terms "tube" and "pipe" are synonymous terms. For general technical delivery…

For the purpose of this standard, which constitutes the technically revised second edition, the definitions in ISO 2569 apply. Sampling shall be made according to ISO 4707. Designation consists of the words "cylindrical cork stoppers" followed by the figures which correspond to their length and diameter, in millimetres, separated by a cross.

1. Scope 1.1 This Standard is concerned with the performance, durability, and safety of packaged seasonal solar domestic hot water (SSDHW) systems designed to provide hot water for small residential buildings. In these systems freeze protection is accomplished manually, with or without a device intended to offer limited freeze protection. It is intended to cover systems that provide all or…

For the purpose of this standard the definitions in ISO 633 and the definition given herein apply. The tiles shall be tested as specified in ISO 354 taking into account particulars which are defined. Constitutes a technical revision of the first edition.

Applies to the dimensions considered essential to provide fit of blazers, for wear by juniors (Junior Range Canada Standard Sizes 5 to 19), misses (Misses Range CSS 6 to 20), and women (Women's Range CSS 10-1/2 to 28-1/2 and 30 to 48). Dimensions for shorter waists and longer waists are included.

1. Scope 1.1 This Standard applies to Specification TC-225 portable rigid polyethylene intermediate bulk containers having a capacity in the range of 225 to 2500 l for the transportation of certain dangerous goods in Classes 3, 4, 5, 6.1, 8, and 9, and Packing Groups II and III. 1.2 This Standard sets forth the requirements for design, manufacture, selection, and use of TC-225 rigid…

1. Scope 1.1 This Standard applies to heat tracing cables, heat tracing cable sets, and their related components that are intended (a) to provide supplemental heat to maintain or raise the temperature of a pipe, vessel, instrument, or related equipment; (b) for permanent installation in Class I, Groups A, B, C, and D, Divisions 1 and 2; Class II, Groups E, F, and G, Divisions 1 and…

1. Scope 1.1 This Standard applies to isolating switches, without enclosures, for use indoors at voltages from 751 to 46 000 V ac or for installation in switchgear assemblies (see CSA Standard C22.2 No. 31) or similar equipment for use indoors or outdoors, in nonhazardous locations, in accordance with the Rules of the Canadian Electrical Code, Part I.

1. SCOPE 1.1 This Standard applies to household and commercial (hairstyling salon) electrical hairdressing equipment of the portable, pedestal, and table-mounted types, including hair dryers, hair steamers, combs, curlers, and the attachments with which they are sold, rated at 250 V and less, designed for use in nonhazardous locations in accordance with the Rules of the Canadian Electrical…

1. Scope This Standard applies to Types USEI 90 and USEB 90 service-entrance cables intended for underground installations on systems (a) having a nominal voltage rating of 600 V and less; (b) having a maximum allowable conductor temperature of 90°C; and (c) in accordance with the Rules of the Canadian Electrical Code, Part I.