Rechercher

1. Scope 1.1 This Standard applies to supply and exhaust mechanical ventilation equipment. Examples of equipment covered by this Standard would be bathroom fans, kitchen fans, or ventilation equipment forming part of a central ventilation system. 1.2 The purpose of this Standard is to establish a uniform method (a) to determine the air movement characteristics; and (b) to…

1. Scope 1.1 This Standard provides a calculation method for determining the output capacity of a residential space heating appliance or group of appliances, and the output capacity of a residential cooling appliance or group of appliances required to maintain specified indoor environmental conditions under specified outdoor environmental conditions. 1.2 This Standard also provides restrictions…

1.1 Applies to an inhibited phosphoric/oxalic acid type rust-stain remover that, when diluted with water, will remove rust stains from painted ferrous surfaces in the presence of small amounts of grease and oil. 1.2 Inhibited rust-stain remover covered by this standard is for use on painted ferrous surfaces or other painted metal surfaces stained by rust, e.g. ships and other marine…

1.1 Applies to black chemical finish for use on copper and copper alloy surfaces. 1.2 Intended Uses - Finishes to this standard are for decorative or corrosion retardant purposes on copper-alloy surfaces, except those used in food service or water supply. The ability of the finish to retard corrosion is limited, and so should be used on items not subject to corrosion, such as small…

Applies to two types of vinyl-coated fabric differentiated on the basis of mass per unit area, intended for use as upholstery for public seating. The standard contains physical properties, performance requirements and related test methods.

This standard establishes safety requirements for baby incubators with the view to minimizing hazards to the patient and user. It also specifies tests by which compliance requirements can be verified. It does not apply to transport incubators nor infant radiant warmers which are covered in other publications.

This standard establishes safety standards for the safety of transport incubators which minimize hazards to the patient and user. lt also specifies tests to verify compliance with the requirements. It does not apply to baby incubators or radiant warmers.

Defines the information necessary to describe the conductive and the non-conductive patterns of a printed board, particularly where artwork masters or original production masters are prepared by the customer and used by a manufacturer in the fabrication of printed boards. This standard applies to the method of preparation of the artwork master or the original production master, irrespective of…

Provides for acceptance tests of steam turbines of various types and capacities with appropriate measuring uncertainty. Only the relevant portion of these rules will apply to any individual case. The resulting measuring uncertainty of the test result is determined by calculating methods presented in this standard.

This standard applies to type-tested assemblies (TTA) intended for use on construction sites, i.e. temporary places of work to which the public do not generally have access and where building construction, installation, repairs, alteration or demolition of property (buildings) or civil engineering (public works) or excavation or any other similar operations are carried out. These assemblies may…