Rechercher

Deals with the qualification, application, inspection, testing, handling, and storage of materials required for plant-applied fusion bond epoxy coating applied externally to bare steel pipe. The coated pipe is primarily intended for buried or submerged service for oil or gas pipeline systems. Note: It is not intended that the application of this Standard should prevent the development of…

Deals with the qualification, application, inspection, testing, handling, and storage of materials required for plant-applied polyethylene coating applied externally to bare pipe, whereby an adhesive is interposed between a bare or epoxy primed pipe and the polyethylene. The coated pipe is primarily intended for buried or submerged service for oil or gas pipeline systems. Note: It is not…

This National Standard of Canada is equivalent to International Standard ISo 1567-1988. 1.1 This International Standard gives a classification of, and specifies requirements for, denture base polymers; it also specifies the test methods to be used to determine compliance with these requirements. This International Standard applies to the following denture base polymers : a) poly(…

Applies to the dimensions considered essential to provide for the fit of coats and jackets which are insulated for winter wear, with or without hoods, that are intended for wear by little girls and little boys (CSS regular range, sizes 2 to 6X), girls (CSS regular range, sizes 7 to 16) and boys (CSS regular range, sizes 7 to 20).

1.1 Describes the procedures for spot radiography of ferrous butt welds that have a joint efficiency factor of not more than 85%, or welded butt joints in ferrous materials for which the design unit stress factor does not exceed 85% of the allowable unit stress of the base metal. It also includes recommendations on acceptance criteria by which the welded butt joints are to be assessed.…

Applies to laboratory standard microphones meeting the requirements of IEC 61094-1 and other types of condenser microphones having the same mechanical dimensions or specifies a primary method of determining the pressure sensitivity so as to establish a reproducible and accurate basis for the measurement of sound pressure. This publication supersedes IEC 60327.

This is a searchable PDF. 1.1 Scope 1.1.1 This standard covers gas-fired refrigerators, hereinafter referred to as refrigerators or appliances, having refrigerated spaces for: (a) Storage of foods; or (b) Storage of foods and making ice; or (c) Storage of frozen foods and making ice; or (d) Storage of foods and the storage of frozen foods and making ice. It applies to newly produced,…

1. Scope 1.1 This Standard applies to electric fence controllers intended for use in accordance with the Rules of the Canadian Electrical Code, Part I, on circuits having a nominal voltage of 120 V or less. 1.2 These requirements cover indoor and outdoor types of electric fence controllers that utilize either peak-discharge or timed-sinusoidal circuits to obtain the high voltage…

1.1 Provides procedures for measuring harmonic currents generated by equipment to the extent that they affect the safety of electrical installations when the equipment is installed in accordance with the Canadian Electrical Code, Part I. 1.2 The procedures described in this Standard are provided for referencing in the Standards forming Part II of the Canadian Electrical Code. Although…

1. Scope 1.1 This Standard applies to splitters, having a current rating of 5000 A and less, intended for installation in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I on systems having nominal voltages of 600 V and less.