1. Scope
1.1 This Standard specifies requirements for organic adhesives suitable for the installation of ceramic wall tile in interior areas requiring intermittent and prolonged water resistance.
1.2 Types This Standard classifies adhesives as one of the following types: (a) Type 1 - organic adhesives suitable for installation of ceramic wall tile in areas requiring prolonged water…
1. Scope
1.1 This Standard specifies requirements for organic adhesives suitable for bonding polystyrene insulation to itself and to interior and exterior surfaces of concrete, brick, and dry wall or similar porous surfaces in building construction, for application between temperatures of -10°C and 38°C. Note: This Standard does not address odour or tainting of food. Before an adhesive is…
1. Scope
1.1
This Standard prescribes guidelines for design, evaluation, and test of
electronic safety functions, and is intended to provide guidance to the
Subcommittees of the Standards Steering Committee on the Canadien Electrical
Code, Part II.
1.2
This Standard applies to individual electronic components, assemblies, or
systems including software and firmware that perform a…
1. Scope
1.1 This Standard applies to a Type FCC under-carpet wiring system utilizing cable that is installed under carpet squares that are removable, and associated accessories, intended for use in accordance with the Rules of the Canadian Electrical Code, Part I.
Thermal Insulation, Urethane and Isocyanurate, Boards, Faced
Covers requirements and test methods for polyurethane and
polyisocyanurate cellular plastic thermal insulation in the form
of rigid boards faced on both sides with a membrane and primarily
intended for use in applications where the continuous use
temperature is within the range -60 degrees C and +80 degrees C.
The standard covers various facing materials with four types of
board…
Applies to polyethylene pipe, tubing and fittings for use in gas
mains and services including gathering, transmission, and
distribution application, which carry fuel gases containing not
more than 1% of aromatic hydrocarbons. It also applies to all
types of fittings and connections used in a 'plastic' gas pipe
system including plastic-to-metal transition fittings, plastic
fittings…
1. Scope
1.1 This Standard applies to kerosine-fuelled appliances with capacities up to 4400 W that are primarily used as portable space heating appliances.
1.2 Appliances with input capacities greater than 4400 W may be examined and tested in accordance with these requirements and with any additional requirements deemed necessary by the regulatory authority.
1.3 This Standard…
Electrical Equipment for Flammable and Combustible Fuel Dispensers
1. Scope
1.1 This Standard applies to the electrical features of power-operated dispensers for petroleum-based liquids, including propane and lighter-than-air fuel such as natural gas, used as fuel in internal combustion engines, where such devices are operated at 750 V and less, in accordance with the Rules of the Canadian Electrical Code, Part I, and are intended to dispense the fuel directly…
