C22.2 No.0.8-M1986 (R2008)
1. Scope
1.1
This Standard prescribes guidelines for design, evaluation, and test of
electronic safety functions, and is intended to provide guidance to the
Subcommittees of the Standards Steering Committee on the Canadien Electrical
Code, Part II.
1.2
This Standard applies to individual electronic components, assemblies, or
systems including software and firmware that perform a safety function.
1.3
This Standard does not identify the unsafe conditions for which protection is
required or indicate selection of the means that is appropriate for safety
evaluation, as these considerations are to be the responsibility of the
individual Subcommittees of the Standards Steering Committee on the Canadian
Electrical Code, Part II.
1.4
The procedures listed in this Standard are recommended for reference in the
Standards forming Part II of the Canadian Electrical Code. Although the verbal
auxiliary "shall" is used to state the requirements of each test procedure
given, it is essential to recognize that the procedures are nonmandatory in
themselves, unless mandated by reference in individual Standards of Part II of
the Canadian Electrical Code, or by Standards of other standards-writing
organizations, or by users of this Standard.
OEN:
CSA
Langue:
English
Code(s) de l'ICS:
29.020;
31.020;
13.110
Statut:
Annulée
Date de Publication:
1986-01-31
Numéro Standard:
C22.2 No.0.8-M1986 (R2008)